GuitarDoyle Posted August 9, 2009 Share Posted August 9, 2009 Hey guys!!!!!!! I haven't been on here in a while. I have been having some health problems and alighter, better balanced, more ergonomically correct guitar in the LP tonal range would be just what I need. I have been checking out PRS CU22s, Hamer Studios, but I had a Studio back in the late 90s or around 2000 or so and liked it but when I got my LP, I sold the Hamer. Now, I am interested in buying anotherWhat is the weight and balance like on these? Fret work? Woods? Smooth frets along the edges or sharp and jagged? I was looking at PRS CU22s but the prices used! Yikes. I was also lookingat Dean USA Hardtails.Its been a while and I forget how the playability is on the Hamers. Are the necks beefy, like the LP 50s neck? That's what I want.Tones? Thanks!RIch Link to comment Share on other sites More sharing options...
lord nelson Posted August 9, 2009 Share Posted August 9, 2009 The vintage neck carve is slightly thinner than the 50s neck, and more of a C shape. The LPs I have played with 50s neck had almost a D shape.I might be talking out of my ass though Link to comment Share on other sites More sharing options...
Steve Haynie Posted August 9, 2009 Share Posted August 9, 2009 You have an option in neck carves if you are buying a new guitar. Unless you can give a reference on what you are playing now, it is going to be hard to offer a description of how a Hamer compares. Link to comment Share on other sites More sharing options...
Mindseyes Posted August 10, 2009 Share Posted August 10, 2009 Neck woods are going to be 99.9999999% of the time mahog. and rosewoodFret work on the 10 Hamers ive owned have been perfect, the 3 prs that i own have had to have a little file work on the ends, most people would not have noticed the tiny jaged spots but im super OCD about fret ends Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 10, 2009 Author Share Posted August 10, 2009 Ha! I am super OCD about fret ends too! I always run my fingers down the board to feel a nice smooth edge, nothing sharp. Ha.Right now, my main guitars are a Les Paul Standard with 50s neck, 89 SG, 98 American fat strat and PRS CE-22 with wide-fat neck.On the V neck. I heard the Dean hardtail USA has a V type neck.I can't afford a new one right now! I know I heard at some point they started meaking them fatter in the neck. Maybe the late 90s?What do you think of this one? I need to know if it has a maple top which I want! Looks interesting and different! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...sid=p2759.l1259 Link to comment Share on other sites More sharing options...
bubs_42 Posted August 10, 2009 Share Posted August 10, 2009 I'll try not to be bias but the Hamer Studio is a fantastic guitar that is very well balance. Fret work, finish, wood is second to none. Most of all you can get one for under a $1,000.00 and its twice the guitar. I've had 10 hamers or so and i've only had one Dog and it was probly just in my head.. Good luck to ya. In reference to you Ebay link, a tad more money and or a little time you can get one with no issues. Those are some pretty large battle scars. Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 10, 2009 Author Share Posted August 10, 2009 I had a Studui solid Mahogany back in the early '00s but I would have prefered a maple top so that is what I am looking for now. I recall it set up really well, low action and a LPish tone, very rich and sweet.I believe they are LP scale length? 24 3/4? Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 11, 2009 Author Share Posted August 11, 2009 I am shocked they go for under $1000 on ebay since I have seen em way expensive new.I only have one LP and am trying to figure out if I want another LP or make my LP a very versatile LP and instead get a Hamer Studio. Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 13, 2009 Author Share Posted August 13, 2009 Can someone tell me the thickness of the Studio? Thick as an LP? I just hope when i find one, it has as sweet and almost as big a tone as an LP. They seem thicker than say a PRS McCarty or Dean Hardtail from appearance. Link to comment Share on other sites More sharing options...
atquinn Posted August 14, 2009 Share Posted August 14, 2009 Can someone tell me the thickness of the Studio? Thick as an LP? I just hope when i find one, it has as sweet and almost as big a tone as an LP. They seem thicker than say a PRS McCarty or Dean Hardtail from appearance. (I've been trying to stay out of this thread because I'm completely non-objective when it comes to Studios ) Studios are not as thick as LP's (although I believe my '06 might be since the body is 1/4" thicker than usual). Overall body thickness at the edge is 1 5/8" with 1 1/4" being mahogany. Obviously the center is going to be thicker overall because of more maple. I think that's more like PRS Custom thickness as opposed to McCarty thickness, but one of the resident PRS experts can chime in on that. -Austin Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 14, 2009 Author Share Posted August 14, 2009 Are the solid color Studios, all mahogany???I had one and didn't sound as good as my LP or SG. I am thinking I need the maple top.Were the necks thinner in the early to mid 90s? I heard they thickened up in late 90s. Link to comment Share on other sites More sharing options...
atquinn Posted August 14, 2009 Share Posted August 14, 2009 Are the solid color Studios, all mahogany??? I had one and didn't sound as good as my LP or SG. I am thinking I need the maple top. Were the necks thinner in the early to mid 90s? I heard they thickened up in late 90s. 1) Not necessarily. If you see a solid color with no body binding, solid mahogany would be a safe bet. If you see body binding then it probably has a maple top. 2) Yes, necks were generally thinner in the early-mid 90's. I think Hamer adopted their standard vintage carve in the late 90's. All the Studios I've had that have been made in the 2000's had the same beefy (but no overwhelmingly huge) vintage neck carve, but you can special order whatever you want, so it doesn't hurt to ask the seller (although I never bother since I get along fine with all of Hamer's neck carves ). -Austin Link to comment Share on other sites More sharing options...
seeker Posted August 14, 2009 Share Posted August 14, 2009 Are the solid color Studios, all mahogany??? I had one and didn't sound as good as my LP or SG. I am thinking I need the maple top. Were the necks thinner in the early to mid 90s? I heard they thickened up in late 90s. 1) Not necessarily. If you see a solid color with no body binding, solid mahogany would be a safe bet. If you see body binding then it probably has a maple top. 2) Yes, necks were generally thinner in the early-mid 90's. I think Hamer adopted their standard vintage carve in the late 90's. All the Studios I've had that have been made in the 2000's had the same beefy (but no overwhelmingly huge) vintage neck carve, but you can special order whatever you want, so it doesn't hurt to ask the seller (although I never bother since I get along fine with all of Hamer's neck carves ). -Austin By name, and hence specs, they standardized them 2003 thru today. The standard, default, is Vintage. Nice and thick, but not quite a baseball bat. The other, by special order but at no additional cost, is Modern. Just a tad bit thinner. You can order a custom neck by spec, but that has an upcharge. Someone posted the actual measurements on this board a while back. In general, they are thicker from late 90s and on. I've got a couple 2001's that are pretty much like the Vintage carve. Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 27, 2009 Author Share Posted August 27, 2009 Do you think they are nice and full sounding like an LP....or more thin?Hey guys, I heard on the LP forum from guys who own Hamers that the three piece Hamer neck can have problems with stability. Apparently it gives too easy and needs adjustment a lot?Also, what are the exact year they started making the thicker neck? I hate when i see a Hamer on ebay frm the 90s like 95 or 96 but have no idea of the neck. Link to comment Share on other sites More sharing options...
Lockbody Posted August 27, 2009 Share Posted August 27, 2009 I hate when i see a Hamer on ebay frm the 90s like 95 or 96 but have no idea of the neck.Generally, the 95-98 necks are more like the Gib$0n slim taper neck. The smaller side of medium. Link to comment Share on other sites More sharing options...
seeker Posted August 27, 2009 Share Posted August 27, 2009 Actually, it seems to be more of a crapshoot during the later half of that period. I've had a 97 Studio with that slimmer neck, but have a 97 Special with a Modern-spec-type neck. Link to comment Share on other sites More sharing options...
atquinn Posted August 27, 2009 Share Posted August 27, 2009 Hey guys, I heard on the LP forum from guys who own Hamers that the three piece Hamer neck can have problems with stability. Apparently it gives too easy and needs adjustment a lot?It should be the exact opposite, but I haven't owned many guitars with one-piece necks so I couldn't say for sure.-Austin Link to comment Share on other sites More sharing options...
zenmindbeginner Posted August 27, 2009 Share Posted August 27, 2009 Do you think they are nice and full sounding like an LP....or more thin? Hey guys, I heard on the LP forum from guys who own Hamers that the three piece Hamer neck can have problems with stability. Apparently it gives too easy and needs adjustment a lot? Also, what are the exact year they started making the thicker neck? I hate when i see a Hamer on ebay frm the 90s like 95 or 96 but have no idea of the neck. Guys who play Les Pauls have every reason to dog Hamers. I tune one of my Hamers to a dropped B and use 12 gauge strings with NO problems. The guitar came from the factory without much back bow and I only had to adjust the truss rod ONCE in 24 years to loosen it up a tad. The neck is iron. Gibson players all know that Hamers are as good or a bit better and half of the price. Plus, every time someone purchases a Hamer, a Gibson somewhere goes out of tune. Link to comment Share on other sites More sharing options...
seeker Posted August 27, 2009 Share Posted August 27, 2009 Hey guys, I heard on the LP forum from guys who own Hamers that the three piece Hamer neck can have problems with stability. Apparently it gives too easy and needs adjustment a lot?It should be the exact opposite, but I haven't owned many guitars with one-piece necks so I couldn't say for sure.-AustinThe reason Hamer does three-piece necks IS for stability. It's not like they ever skimp on wood. Studios are still generally made from One-Piece of genuine, prime Honduran mahogany. I don't think Gibson uses Honduran mahogany on anything other than the expensive Historic/Custom Shop models anymore. BTW, I have had six Studios over the years, and have -never- had to adjust a single one of them. Link to comment Share on other sites More sharing options...
psc3251 Posted August 27, 2009 Share Posted August 27, 2009 hi- Like Austin I've been trying to not be biased....BUT....I've just sold my last Gibson Les Paul (class 5 quilt) and bought my FOURTH- yes fourth Studio (well 3 are Sunbursts but same thing...).... Gibson players will love their LP's- I did- since 94 I've owned 14 of them in total- one of them twice! They 'chunk'- they growl etc.... but I prefer HAMERS ! I had a PRS- hated it! Just not my thing- no neck binding and a longer scale....Went back to LP's..... Bought my first Hamer in Jan / Feb this year - 91 Sunburst......and I love them. Slightly thinner body (my forearm doesn't get bruised after a night jammin or playing) the necks are more comfortable (I have skinny and the recent 07 carve)....the finish is WAY better than my LP's, even Custom & Historic LP's........and more importantly they ALL sound superb. No problems with necks- one has 10's to 52's, one is drop-D tuned and the other two have Floyds- no problems. I always had tuning problems with my LP's- except the one that had a headstock break...funny that, eh? Cheers, Dave Link to comment Share on other sites More sharing options...
Devnor Posted August 27, 2009 Share Posted August 27, 2009 Seems like my Hamers are always tuned sharp when I pick them up. At lunch I was playing Feyman's Future Standard that I had not touched in a couple months...it was a 1/4 step sharp out of the case. The Suhrs or my Les Pauls don't do that. I love my Hamers but I'm just sayin'. Maybe the 3 piece neck won't twist but they sure move quite a bit. Link to comment Share on other sites More sharing options...
atquinn Posted August 27, 2009 Share Posted August 27, 2009 Seems like my Hamers are always tuned sharp when I pick them up. At lunch I was playing Feyman's Future Standard that I had not touched in a couple months...it was a 1/4 step sharp out of the case. The Suhrs or my Les Pauls don't do that. I love my Hamers but I'm just sayin'. Maybe the 3 piece neck won't twist but they sure move quite a bit. Mine haven't seemed any more or less stable than any of my other brands of guitars, all of which I have had to tweak (truss-rod style) when the seasons change. Assuming I have them long enough for the seasons to change. -Austin Link to comment Share on other sites More sharing options...
Guest pirateflynn Posted August 27, 2009 Share Posted August 27, 2009 Maybe the 3 piece neck won't twist but they sure move quite a bit.Really? That is interesting because my guitars will sometimes go slightly sharp while at rest, too. I've always assumed that it was the strings cooling down/ tightening and not the neck moving because the action remains the same, etc. Link to comment Share on other sites More sharing options...
GuitarDoyle Posted August 29, 2009 Author Share Posted August 29, 2009 Dave, coming from LPs...you don't find a Studio less full sounding next to an LP? I play mostly classic rock to hard rock so for me it always seems LPs rule that territory. hi- Like Austin I've been trying to not be biased....BUT....I've just sold my last Gibson Les Paul (class 5 quilt) and bought my FOURTH- yes fourth Studio (well 3 are Sunbursts but same thing...).... Gibson players will love their LP's- I did- since 94 I've owned 14 of them in total- one of them twice! They 'chunk'- they growl etc.... but I prefer HAMERS ! I had a PRS- hated it! Just not my thing- no neck binding and a longer scale....Went back to LP's..... Bought my first Hamer in Jan / Feb this year - 91 Sunburst......and I love them. Slightly thinner body (my forearm doesn't get bruised after a night jammin or playing) the necks are more comfortable (I have skinny and the recent 07 carve)....the finish is WAY better than my LP's, even Custom & Historic LP's........and more importantly they ALL sound superb. No problems with necks- one has 10's to 52's, one is drop-D tuned and the other two have Floyds- no problems. I always had tuning problems with my LP's- except the one that had a headstock break...funny that, eh? Cheers, Dave Link to comment Share on other sites More sharing options...
Russ Posted August 29, 2009 Share Posted August 29, 2009 I have a total of 16 guitars / basses.I have 7 Hamer USA GuitarsI have 1 PRS Custom 24I have 1 Parker US NiteFlyI have 1 Carvin DC135My Number 1 Gigging Guitar - 95 Hamer StudioMy Number 2 Gigging Guitar - 94 Hamer StudioI am apparently somewhat biased though. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.