diablo175 Posted March 10, 2015 Share Posted March 10, 2015 Some of you may remember me posting about my co-guitarist embarking on a guitar building odessy. Addict Guitars Well, after two LP style, two Strat style and one custom design of his own under his belt, I've decided to have him build me one. Now, I need another shredder like I need a hole in the head but this is an opportunity I couldn't refuse. Truly custom made, from choice of wood to hardware to finish. You just don't get more custom built than this. So, with a blank canvas in front of me and an endless choice of paints with which to create, I went to work. Here's what I came up with: Naturally, it HAD to be Cali- shaped. But from there, the variations/deviations begin. Neck thru construction Maple/'hog/maple sandwiched neck w/ 12- 16" compound radius (ala Jackson), graphite rods and a double action truss rod Alder body Maple board Reversed "hockey stick" head stock 27 stainless steel jumbo frets 2 H config- TB-5 Custom and a SH-1 '59 in the neck. 1 Vol, 1 tone w/ push pull for tapping bridge p'up Toggle switch FU Tone custom Floyd Schaller M6 tuners Dunlop strap locks Control layout will be similar to Cali's with respect to jack input and volume/tone knobs. The toggle will be between the vol and tone knobs. Now the fun part(s) This will NOT feature boomers as originally intended but instead will feature LEDs in a "traveling" config! The finish will be professionally done based on my design, featuring Japanese- style woodblock art and a thematic Kanji character on the head stock. The neck will be unfinished (save for oil). The best part of this is I will have direct access to the build at all phases, save for the paint, and can inspect and suggest changes (within reason) throughout the build. That, coupled with the fact that it'll take about 6 months and this has the potential to be epic!!! Link to comment Share on other sites More sharing options...
Sugartune Posted March 10, 2015 Share Posted March 10, 2015 That sounds awesome and exciting. Congrats!I look forward to seeing and hearing more updates as it progresses. Link to comment Share on other sites More sharing options...
DBraz Posted March 10, 2015 Share Posted March 10, 2015 Sounds interesting Jim. I look forward to seeing the LED install pics! Link to comment Share on other sites More sharing options...
Bennyboy-UK Posted March 10, 2015 Share Posted March 10, 2015 Do a sketch of it! Link to comment Share on other sites More sharing options...
diablo175 Posted March 10, 2015 Author Share Posted March 10, 2015 Do a sketch of it! Already have a mock up of it but I'm holding out to do a big reveal in 6 months time. Link to comment Share on other sites More sharing options...
diablo175 Posted March 11, 2015 Author Share Posted March 11, 2015 For those who might wanna see this develop, step by step:Burrito Build Blog Link to comment Share on other sites More sharing options...
Michael_B Posted March 11, 2015 Share Posted March 11, 2015 The specs look great. I look forward to seeing the finished product. Link to comment Share on other sites More sharing options...
Spike Posted March 12, 2015 Share Posted March 12, 2015 Do a sketch of it! Already have a mock up of it but I'm holding out to do a big reveal in 6 months time. Oh, you bastid! You post a teaser just to hold us in suspense. That's so unfair. Being so closely involved in a build like that sounds like a fantastic opportunity. And don't think you can get by with just posting pics 6 months from now. We want videos of the guitar in action! Link to comment Share on other sites More sharing options...
Nathan of Brainfertilizer Fame Posted March 12, 2015 Share Posted March 12, 2015 I'm surprised you didn't order it with a blade switch so you could personally modify it to a Gibson toggle after you received it. Link to comment Share on other sites More sharing options...
gorch Posted March 12, 2015 Share Posted March 12, 2015 Pics or it doesn't count! Very good selection of choices. Let us know about the painting. Link to comment Share on other sites More sharing options...
diablo175 Posted March 12, 2015 Author Share Posted March 12, 2015 I'm afraid that the reveal for the finish concept will be long in waiting. Frankly, depending on who does the work, it can take up to several months. No in-porgress pictures are typically made available by the two painters who would handle this. You're just going to have to be patient... ...or wait until my patience erodes, which it typically does as the project starts to gather momentum. Link to comment Share on other sites More sharing options...
FGJ Posted March 12, 2015 Share Posted March 12, 2015 Oh, man, I can't wait to see that, Jim!! You're getting all the killer specs, too. Can you do update posts linking to the progress site? Frankly, I'll forget to visit that site on my own, but I'm always checking here, so if you post the updates here, I'm sure everyone will be thrilled to see how it's coming along. I'm very excited for you, man! Congrats! (Hey, is this what the big sale was all about? You were trying to fund this build?) Link to comment Share on other sites More sharing options...
diablo175 Posted March 12, 2015 Author Share Posted March 12, 2015 Oh, man, I can't wait to see that, Jim!! You're getting all the killer specs, too. Can you do update posts linking to the progress site? Frankly, I'll forget to visit that site on my own, but I'm always checking here, so if you post the updates here, I'm sure everyone will be thrilled to see how it's coming along. I'm very excited for you, man! Congrats! (Hey, is this what the big sale was all about? You were trying to fund this build?) Yup, the big sell off was indeed partially to fund this ax. But the sell off isn't over Link to comment Share on other sites More sharing options...
diablo175 Posted April 7, 2015 Author Share Posted April 7, 2015 In a stunning moment of unprecedented daring and radical deviation from the norm, I've opted for a different finish on the soon-to-be-started Burrito, one that's bound to raise a few eyebrows on here. I have to admit, it's quite out of character for me and signifies some measure of mental imbalance (more so than usual) on my part. Stay tuned. Link to comment Share on other sites More sharing options...
coolfeel Posted April 7, 2015 Share Posted April 7, 2015 Link to comment Share on other sites More sharing options...
veatch Posted April 7, 2015 Share Posted April 7, 2015 I'm guessing jazzburst. Link to comment Share on other sites More sharing options...
cmatthes Posted April 7, 2015 Share Posted April 7, 2015 What, a vintage sunburst? Link to comment Share on other sites More sharing options...
diablo175 Posted April 7, 2015 Author Share Posted April 7, 2015 Chris is feeling a tad redundant today. Nope on all accounts thus far. Hmm. Methinks a contest is in order... Link to comment Share on other sites More sharing options...
diablo175 Posted April 11, 2015 Author Share Posted April 11, 2015 This build is turning out to be quite beneficial and interesting on a number of levels. As my builder digs into the details and is asking some rather intriguing questions, I've discovered several new levels of details and decisions to consider when having a truly custom build made. I've also discovered that Hamers were truly hand built in many regards. Or at least the custom Cali I gave to my luthier buddy to use as a template is.Case in point: The scale length is not quite 25.5" It's a tad shorter. This would not be so if they were machining all aspects of the guitar?The neck is at a slight angle (though this is typical of most Calis from my experience) as opposed to the more flat angling of other makes/models. This would certainly account for the Floyd sitting a bit higher than many of it's competitors. In my guestimation, this was likely to reduce how much wood was needed to be routed/removed for the pull up cavity underneath?The frets on this Cali were HUGE! Much larger than the typical medium jumbos on most Cali's. Again, the custom aspect would likely account for that. Whoever originally ordered it, likely ordered it with wire taller and wider than the 6105 jumbos which is larger than the 6130 on most Cali's. Link to comment Share on other sites More sharing options...
coolfeel Posted April 12, 2015 Share Posted April 12, 2015 did you provide the set neck blue metal-flake as the template? Link to comment Share on other sites More sharing options...
diablo175 Posted April 16, 2015 Author Share Posted April 16, 2015 did you provide the set neck blue metal-flake as the template? No, I gave him the MelonCali- the one p'up, custom job that I had Stike paint neon chartreuse. Link to comment Share on other sites More sharing options...
diablo175 Posted April 16, 2015 Author Share Posted April 16, 2015 does the new paint job include polka dots? It does not. Link to comment Share on other sites More sharing options...
diablo175 Posted May 12, 2015 Author Share Posted May 12, 2015 The Addict Burrito takes shape in CAD. Control lay out will be rendered shortly. Link to comment Share on other sites More sharing options...
DBraz Posted May 13, 2015 Share Posted May 13, 2015 ^^ what a beautiful shape ^^I cant wait to see this come to life! Link to comment Share on other sites More sharing options...
Nathan of Brainfertilizer Fame Posted May 13, 2015 Share Posted May 13, 2015 Interesting to see that you didn't correct the Californian's biggest design blunder.(Yes, I'm trolling. Sorta.) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.