Camstone Posted May 15, 2018 Share Posted May 15, 2018 Does anyone know if there is a direct replacement TOM bridge with roller saddles for a Hamer Newport with a Bigsby? Meaning, a bridge that will fit on the same bridge posts. Thanks! Link to comment Share on other sites More sharing options...
tbonesullivan Posted May 15, 2018 Share Posted May 15, 2018 What kind of bridge is on it now? Link to comment Share on other sites More sharing options...
Camstone Posted May 15, 2018 Author Share Posted May 15, 2018 20 minutes ago, tbonesullivan said: What kind of bridge is on it now? Whatever TOM Bridge Hamer was using 10 years ago. It's this guitar. Thanks Link to comment Share on other sites More sharing options...
tbonesullivan Posted May 15, 2018 Share Posted May 15, 2018 I would think this would be your best bet: probably uses the same bushings: http://www.stewmac.com/Hardware_and_Parts/Bridges_and_Tailpieces/Bridges_and_Tailpieces_for_Electric_Guitar/Locking_Roller_Bridge.html Link to comment Share on other sites More sharing options...
Jakeboy Posted May 15, 2018 Share Posted May 15, 2018 Curious, why are you doing the conversion? Tuning issues? Bridge rockin’ too much? My Newport holds tune wonderfully and I use that whammy like it’s Ike Turner on a 50s Strat. And I am digging the filter idea that yours inspired! Link to comment Share on other sites More sharing options...
Camstone Posted May 15, 2018 Author Share Posted May 15, 2018 I bought another Newport last month that has a Schaller roller bridge on it and I like the way the Bigsby works much better than on the Tron Newport. But I haven't been able to find any info about whether you have to pull the threaded inserts to use the posts that come with the Schaller bridge. Here's the Newport that I just purchased (without the roller bridge). And here's the link to the Schaller bridge that's now on it: http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Electric_Guitar_Parts/Electric_Guitar_Bridges_and_Tailpieces/Tune-o-matic_Bridges/Schaller_Roller_Bridge.html It looks like it comes with two sets of posts, I just don't want to have to pull the threaded inserts out of the top of the Tron Newport. Link to comment Share on other sites More sharing options...
Jakeboy Posted May 16, 2018 Share Posted May 16, 2018 That is a gorgeous Newport! Link to comment Share on other sites More sharing options...
FGJ Posted May 26, 2018 Share Posted May 26, 2018 Yeah, my Newport never goes out of tune, which happily surprised me when I bought it because I had read that Bigsby's often go out of tune. Link to comment Share on other sites More sharing options...
Camstone Posted May 26, 2018 Author Share Posted May 26, 2018 Update. I got a hold of the guy that I bought the Jazzburst Newport from and he told me that the Schaller bridge is a direct replacement and fits on the Hamer posts. So I ordered one from Stewmac for $55.00 and it's the way. Thanks for the input guys. Link to comment Share on other sites More sharing options...
gorch Posted May 26, 2018 Share Posted May 26, 2018 On 5/15/2018 at 7:04 PM, Camstone said: Does anyone know if there is a direct replacement TOM bridge with roller saddles for a Hamer Newport with a Bigsby? Meaning, a bridge that will fit on the same bridge posts. Thanks! I‘m using a Schaller. Perfect fit! Link to comment Share on other sites More sharing options...
Camstone Posted June 2, 2018 Author Share Posted June 2, 2018 Here's the new Schaller bridge installed on my Newport Filtertron. Link to comment Share on other sites More sharing options...
Jakeboy Posted June 2, 2018 Share Posted June 2, 2018 Looks great! Is it helping with tuning stability? Link to comment Share on other sites More sharing options...
Camstone Posted June 2, 2018 Author Share Posted June 2, 2018 16 minutes ago, Jakeboy said: Looks great! Is it helping with tuning stability? Don't know yet. Just put it on this morning and got the intonation and string spacing set. Rehearsal with my band this coming Tuesday night and then three gigs in the next two weeks. More will be revealed. I'm also going to pick up a bit of graphite powder at the local ironmonger. Link to comment Share on other sites More sharing options...
Jakeboy Posted June 2, 2018 Share Posted June 2, 2018 With my Strat , I mixbthebgraphite powder with Vaseline and hit the saddles nut and string tree... it seems to work...my Strat stay in great tune..and on all my guitar with whammy bars, I yank and slam them HARD. i als o use Chapstick or 3in1 oil...... Link to comment Share on other sites More sharing options...
Caddie Posted June 3, 2018 Share Posted June 3, 2018 its always good to have a Chapstick tube in your case compatment and your center console in your car. Link to comment Share on other sites More sharing options...
jaberwock Posted June 6, 2018 Share Posted June 6, 2018 I had a Schaller roller bridge on my Thinline Tele, I changed it for a Wilkinson brass roller bridge which was a direct replacement; the Schallers have a reputation as tone suckers; my Tele sounded a lot better after the change ( pain in the backside to intonate though ). Jaberwock Link to comment Share on other sites More sharing options...
shankyboy Posted June 7, 2018 Share Posted June 7, 2018 I have a Reverend PA-1 RT that comes with a Bigsby and Roller Bridge. It does a wonderful job of staying in tune. Not sure who makes the roller bridge. Link to comment Share on other sites More sharing options...
JohnnyB Posted June 8, 2018 Share Posted June 8, 2018 This may be useless information, but it may come in handy in the future somehow: I got a new bone stock Hamer Newport around 2000. I noticed that when I worked the Bigsby, the bridge rocked back and forth. So to improve tuning stability and reduce stress of teh bridge on the top, I replaced the "rocker" bridge with a roller bridge. I'm not sure anymore which one it was as this was 18 years ago, but I'm pretty sure it was a Stew-mac. The roller bridge provided better tuning stability and return to "neutral", but seemed to lose some tone--less body, less fullness. I put the stock "rocker" bridge back in place and was happier with the tone than with the roller bridge. I may have been doing something wrong; maybe my Newport was a tad defective. i have no definitive conclusion about this experience other than to say that maybe the roller bridge will improve things, but maybe it won't. Unfortunately, to verify anything, I'd have to dig my Newport out from a jungle of Hamers & cases, sewing machines, posters, etc. and then restore it to stock, then compare it with the roller bridge, and try to come up with a conclusion. But realistically I can't guarantee when/where I'd do that. Link to comment Share on other sites More sharing options...
jaberwock Posted June 8, 2018 Share Posted June 8, 2018 2 hours ago, JohnnyB said: The roller bridge provided better tuning stability and return to "neutral", but seemed to lose some tone--less body, less fullness. I put the stock "rocker" bridge back in place and was happier with the tone than with the roller bridge. Totally agree. Link to comment Share on other sites More sharing options...
Question
Camstone
Does anyone know if there is a direct replacement TOM bridge with roller saddles for a Hamer Newport with a Bigsby? Meaning, a bridge that will fit on the same bridge posts.
Thanks!
Link to comment
Share on other sites
18 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.