Russia if you're listening, I want a Scepter!

[Dave Scepter 2,697]

🤘

Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F233262344768

Edited June 19 by Dave Scepter

[ARM OF HAMER 2,190]

                                                                                                                    Its calling you "COMRADE" DAVE.

[a.bandini 798]

I hope the carpet comes with the guitar.  

[Eli 154]

Yakov Smirnoff Approves!

[Tortious 540]

Looks cool, but, um, is that a cracked headstock?

 

[Dave Scepter 2,697]

16 minutes ago, Tortious said:

Looks cool, but, um, is that a cracked headstock?

 

Hard to tell with those drilled through Floyd nuts screws "hate those things"... Definitely majorly stressed though~

90% of all the SS1 models seem to show that stress area... mostly just paint but still makes me really nervous especially a mahogany neck

 

Edited June 19 by Dave Scepter

[gtrdaddy 5,984]

10 minutes ago, Tortious said:

Looks cool, but, um, is that a cracked headstock?

 

 

1 minute ago, Dave Scepter said:

Hard to tell with those drilled through Floyd nuts screws "hate those things"... Definitely majorly stressed though~

It’s a pretty common phenomenon.

[gtrdaddy 5,984]

13 minutes ago, Eli said:

Yakov Smirnoff Approves!

Quit meddling!

[Dave Scepter 2,697]

I find it ironic that it's "Orange"... Okay I'm done 😆

[Dave Scepter 2,697]

Although it is giving me great ideas for a Refin~😉

[cmatthes 16,855]

I have a VERY strong suspicion that I remember this guitar from a decade ago.  If so, that's a total refin...

[Tortious 540]

12 minutes ago, cmatthes said:

I have a VERY strong suspicion that I remember this guitar from a decade ago.  If so, that's a total refin...

Ya'd think they could at least bother to paint over the cracks at the headstock. 🙃

In Russia, guitar refin you?

[Sugartune 1,494]

That’s the first Scepter I’ve liked the look of. That’s sweet. Pricey, I guess especially if it is a refin.

Edited June 20 by Sugartune

[Toadroller 2,506]

If the neck was questionable and they wanted to allay any worries... um... maybe a picture or two of the joint in question, up close and real personal-like, not at the edge of a picture?

Dents beside of the top lock is only a paint, not wood, wood is ok.

[HamStd 1,555]

15 hours ago, cmatthes said:

I have a VERY strong suspicion that I remember this guitar from a decade ago.  If so, that's a total refin...

Chris, I agree that I think that one was a total refin.  

Peter

[Steve Haynie 9,647]

Would Hamer have put a black logo partially over a black finish? 

Hellrider used that metallic burnt orange on more than one guitar he refinished.  His work looked good in photos.  If he refinished that guitar he would have fixed a crack first.  That guitar could have taken a whack since then if he was the one to refinish it. 

Most of the Hamers I have seen with the screws going though the back of the neck for a Floyd nut have the finish cracking between the screw holes.  Studio Custom posted a photo of one of his guitars with no crack, so it is common without affecting every guitar with the Floyd nut attached that way. 

A better photo of the cracking would be a good thing for the seller and the buyer.  There could be more there for discussion.  I had a Hamer with suspicious crack lines that did not have a problem, but it was believed to be more than just finish cracking. 

[kizanski 11,383]

2 minutes ago, Steve Haynie said:

Would Hamer have put a black logo partially over a black finish? 

Hellrider used that metallic burnt orange on more than one guitar he refinished.  His work looked good in photos.  If he refinished that guitar he would have fixed a crack first.  That guitar could have taken a whack since then if he was the one to refinish it. 

Most of the Hamers I have seen with the screws going though the back of the neck for a Floyd nut have the finish cracking between the screw holes.  Studio Custom posted a photo of one of his guitars with no crack, so it is common without affecting every guitar with the Floyd nut attached that way. 

A better photo of the cracking would be a good thing for the seller and the buyer.  There could be more there for discussion.  I had a Hamer with suspicious crack lines that did not have a problem, but it was believed to be more than just finish cracking. 

Hellrider is a whack on crack.

[DBraz 3,734]

2 hours ago, Steve Haynie said:

Would Hamer have put a black logo partially over a black finish? 

Very good point.  

[cmatthes 16,855]

That is definitely his work.  The serial number rendering and the copper finish is what triggered it.

Although it’s unlikely the break was there after he finished it, who knows what lies beneath any of those reworks...

[Steve Haynie 9,647]

For all his problems I remember him being up front about repairs. 

[Dave Scepter 2,697]

Wutzup wit dat case?.. anybody know where I can find him?.. I want to hit him up for some headstock decals 

 

Edited June 20 by Dave Scepter

[cmatthes 16,855]

1 hour ago, Dave Scepter said:

Wutzup wit dat case?.. anybody know where I can find him?.. I want to hit him up for some headstock decals 

 

That's a regular case from that era.

What headstock transfer (not decal...Hamer NEVER used decals) do you need?

[Dave Scepter 2,697]

45 minutes ago, cmatthes said:

That's a regular case from that era.

Yeah but look at the logo and its placement... my Scepter case logos are all positioned on the lower left, "handle up" & not all crooked and stuff 

Photo used for example~

[cmatthes 16,855]

It's not uncommon.

[Siaip Ciuvas 72]

There is a guy from old russian metal band Aria who was fond of Scepters. See his gear page, scroll down to Hamer section: http://www.holstinin.ru/guitars/