Jump to content
Hamer Fan Club Message Center
  • 0

Hamer Cali Floyd replacement


Devnor

Question

10 answers to this question

Recommended Posts

1 hour ago, Devnor said:

My Cali has a few too many stripped saddle set screws.  Anyone ever installed a gotoh or OFR into a Cali? Ibanez edge? 

Yeah, a few ;)😆

 

You can use an OFR IF you also purchase the shortened (38mm) string lock bolts. I recommend going directly to Schaller for them. Contact info below. Takes a few days longer to ship from Germany but worth the wait. You know you're getting the real deal. I would imagine the same can be said about the Gotoh, if it uses the same diameter/length string bolts. Not sure how you determine that.  Gotoh doesn't have that spec listed.

Dr. Lars Bünning
Geschäftsführender Gesellschafter
Managing Director – Owner

 
An der Heide 15
92353 Postbauer-Heng
Deutschland/Germany
Nbg. HRB 22913
Steuer-Nr.: 201/138/00055
USt-IdNr.: DE 250 628 367
Tel.: 0049/(0)9180 910 0
e-mail: Dr
[email protected]

 

Link to comment
Share on other sites

8 minutes ago, Devnor said:

Only thing I like about Gotoh is the trem arm holder.  Which block and nut do you use on your calis?

I use a R2 locking nut and a 37mm block. You know you can get the same type of push in arm socket from Floyd Rose, right?

https://floydrose.com/products/frtapi?variant=29837630034

Link to comment
Share on other sites

3 minutes ago, Devnor said:

Yeah but I need like 10 of those 😎

10 push in arms and receiver assemblies? 🤔

Link to comment
Share on other sites

2 minutes ago, Devnor said:

At least...but for this project I think I'm going to go with all ruthenium hardware

NpPhUB7.jpg

 

giphy.gif

If that had a reversed head stock...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...