Does Hamer still have older wraparound molded saddles low profile bridge?
i come to notice the neck body joint angles are more shallow hence need for lowered wraparound height.
Most wraparounds have about 13mm max saddle height relative to base plane.
Considering posts adding even more height from the ferrules flange lips plus the stud's throat's lower flange of 1mm,
That gives max saddle height with studs bottomed, 13 + 1 + 1 = 15mm relative to topside solid body lumber plane
I added 1 shim per side of 1.5mm, so the height grows to 16.5mm, the stud is torqued onto this shim beneath the stud's lowest flange lip, for perpendicularity
Question
cutis
Does Hamer still have older wraparound molded saddles low profile bridge?
i come to notice the neck body joint angles are more shallow hence need for lowered wraparound height.
Most wraparounds have about 13mm max saddle height relative to base plane.
Considering posts adding even more height from the ferrules flange lips plus the stud's throat's lower flange of 1mm,
That gives max saddle height with studs bottomed, 13 + 1 + 1 = 15mm relative to topside solid body lumber plane
I added 1 shim per side of 1.5mm, so the height grows to 16.5mm, the stud is torqued onto this shim beneath the stud's lowest flange lip, for perpendicularity
is there a lower profile wraparound?
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.