Jump to content
Hamer Fan Club Message Center

Milbert Amplifiers: What dis?


JGale

Recommended Posts

https://milbert.com/gaga

spacer.png

World's most versatile guitar amplifier -- use any combination of power tubes

Adjustable from 1 up to 15-, 30-, 60-, or 90-watts

12 pounds total weight

Transformer-less design eliminates drawbacks inherent in traditional amps

Accepts 36 types of power tubes in any combinations; input tubes can also be changed

Plays "matched" tubes as well as tubes of completely, even wildly different types

Plays all standard tube complements

Allows over 1.6 million combinations of tubes

No adjustments required - all combinations of tubes are auto-biased

Hand-wound power magnetics & impedance converters

Impedance converters attain correct theoretical output transformer turns ratio

No low-frequency saturation, high-frequency roll-off, or phasal non-linearities

Low impedance output drives a wide range of speakers

Not damaged by no load / open-load or shorted load

Automatic protection circuitry

Ramp-up turn-on delay extends tube life

10 - 20 years tube life depending on use

Class AB output stage; 2 push-pull pairs, can be used imbalanced for tonal effect

Tone stack; Effects loop with Send volume control

P3™ Phantom Power powers pedals and active pickups through the signal cable

No heavy power or audio transformers - no hum

Domestic or Universal (autosensing 100-240VAC 50/60Hz) power supplies available

Interchangeable features may be changed for look, or removed to cut weight even further

Fits anywhere, even inside a "small head" case with room to spare.

Uses patented designs by David Berning, one of the world's premier audio designers

Premium components and craftsmanship, made in USA

Upgradeable to any power capability and/or international supply

Link to comment
Share on other sites

27 minutes ago, JGale said:

https://milbert.com/gaga

spacer.png

World's most versatile guitar amplifier -- use any combination of power tubes

Adjustable from 1 up to 15-, 30-, 60-, or 90-watts

12 pounds total weight

Transformer-less design eliminates drawbacks inherent in traditional amps

Accepts 36 types of power tubes in any combinations; input tubes can also be changed

Plays "matched" tubes as well as tubes of completely, even wildly different types

Plays all standard tube complements

Allows over 1.6 million combinations of tubes

No adjustments required - all combinations of tubes are auto-biased

Hand-wound power magnetics & impedance converters

Impedance converters attain correct theoretical output transformer turns ratio

No low-frequency saturation, high-frequency roll-off, or phasal non-linearities

Low impedance output drives a wide range of speakers

Not damaged by no load / open-load or shorted load

Automatic protection circuitry

Ramp-up turn-on delay extends tube life

10 - 20 years tube life depending on use

Class AB output stage; 2 push-pull pairs, can be used imbalanced for tonal effect

Tone stack; Effects loop with Send volume control

P3™ Phantom Power powers pedals and active pickups through the signal cable

No heavy power or audio transformers - no hum

Domestic or Universal (autosensing 100-240VAC 50/60Hz) power supplies available

Interchangeable features may be changed for look, or removed to cut weight even further

Fits anywhere, even inside a "small head" case with room to spare.

Uses patented designs by David Berning, one of the world's premier audio designers

Premium components and craftsmanship, made in USA

Upgradeable to any power capability and/or international supply

Sounds like the Futterman design of OTL power amp designs.

I used to work for a company called New York Audio Labs who used this design in their tube amps.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...