Dutchman Posted August 28, 2022 Share Posted August 28, 2022 Ok, been a week and the more I discover the more I like it. I had my youngest son (Drummer) just push buttons and turn knobs while I played yesterday. He knows nothing of setting up guitar pedals but he knows good guitar tone. He dialed in some awesome tone's! It's staying on the board!! It was super fun too!!! Link to comment Share on other sites More sharing options...
Rich_S Posted August 29, 2022 Share Posted August 29, 2022 A while back, I settled on a TC Flashback 2 delay for my main board. It gave me a few presets and a pseudo-expression-pedal in a single-sized pedal. It isn’t perfect and I’m a bit leery of the reliability of TC’s foot switch but it was the best I could find and I figured I’d make do. Within a couple of weeks, I saw Andy’s demo and the videos he did with the TPS guys. *#%}¥+*^!!!!! Damn you Andy Timmons! Damn you Robert Keeley! That *#%}¥+*^ pedal is perfect! Why not a month sooner?!? Time to revise the board yet again. Somebody gimme three hunnert bucks. Link to comment Share on other sites More sharing options...
HSB0531 Posted August 29, 2022 Share Posted August 29, 2022 My only experience with Keeley pedals is the GC-2 Limiting Amplifier which is really good. Link to comment Share on other sites More sharing options...
hamerhead Posted September 2, 2022 Share Posted September 2, 2022 The demo sounds great. ....I DON'T NEED ANOTHER DELAY PEDAL.I DON'T NEED ANOTHER DELAY PEDAL.I DON'T NEED ANOTHER DELAY PEDAL.I DON'T NEED ANOTHER DELAY PEDAL.I DON'T NEED ANOTHER DELAY PEDAL.I DON'T NEED ANOTHER DELAY PEDAL.... Link to comment Share on other sites More sharing options...
Rich_S Posted September 3, 2022 Share Posted September 3, 2022 The Halo is presently 15% off at Sweetwater. $255 seemed more reasonable to me so I ordered one. The standard black is back ordered, so I went with the new “Andy Apple Red” version. GC is advertising the same sale price, but they don’t have any Halos at all. Link to comment Share on other sites More sharing options...
Hamerica Posted September 4, 2022 Share Posted September 4, 2022 Mrs. Hamerica notified me she ordered a new pair of shoes. I was notified by Sweetwater on the 15% sale and my oh my, look "Andy Apple Red" to boot. Honey, look at my new shiny pedal." ! And(y) it was just my size! https://www.hamerfanclub.com/forums/topic/94948-keeley-halo-andy-timmons-dual-echo/#comment-1100012 Hamerica Link to comment Share on other sites More sharing options...
Rich_S Posted September 5, 2022 Share Posted September 5, 2022 My Halo showed up three days early. Ordered Friday morning, arrived Sunday afternoon, even with free shipping. I was supposed to to outside weeding and re-seeding large sections of our lawn toady, but it's presently pouring outside, so I have some time to unbox and try out my new Andy-apple-red toy. Nigel "helped" me install it on my board. So far, I love the amount of capability packed into a single-sized pedal. Tap tempo, infinite repeat, preset selection, all with just the two buttons. It's going to take some practice to remember how it all works. Compared to my previous two delay pedals, I like it a lot better. It is, of course, half the size of the EHX Grand Canyon. The Grand Canyon has a few more delay types, but the Halo has the sounds I will use and is easier to control with my feet. The TC Flashback 2 can probably do the sounds of the Halo, but I didn't like having to use the USB cable and editor software to create Toneprints. I love that the Halo gives me all the controls right there on the pedal (if I can remember how it all works). As delivered, the pre-programmed sounds aren't much good for me. Timmons runs a stereo rig with the delay in the loop, whereas I run an old-school single, crunchy amp with all the pedals in front. So right off the top, all the presets have the mix set too high. I'll make with the playing and presetting and follow up when I get my sounds dialed in. Link to comment Share on other sites More sharing options...
Teh Posted September 8, 2022 Share Posted September 8, 2022 One is landing in my mailbox today. Tried to resist, but it just sounds sooooo good... Link to comment Share on other sites More sharing options...
Rich_S Posted September 14, 2022 Share Posted September 14, 2022 Gotta love Keeley's attention to detail. Below is a diagram from the Halo Instruction booklet, showing how to change preset banks. The device used to press the buttons is unmistakably a Converse All-Star, which is as it should be in the guitar-playing world. Below that for reference is a photo of the 2019 incarnation of my pedalboard, showing my pedal-activation footwear of choice. Link to comment Share on other sites More sharing options...
Teh Posted September 16, 2022 Share Posted September 16, 2022 Finally got the new one on the board. Was able to run stereo at a recent show and loved the impact of bouncing delays, so installed the Halo in stereo via the FX loop of the Stomp. The output of the stomp will sum the two stereo sides if using the mono output. And yes, I know I have an overdrive problem... Link to comment Share on other sites More sharing options...
JGale Posted September 16, 2022 Share Posted September 16, 2022 {makes sign of the cross} You are forgiven your OD obsession since it is obviously in good taste! Link to comment Share on other sites More sharing options...
Teh Posted September 16, 2022 Share Posted September 16, 2022 Or I'm easily influenced by YouTube product demos... Link to comment Share on other sites More sharing options...
Disturber Posted September 17, 2022 Share Posted September 17, 2022 On 9/5/2022 at 5:36 PM, Rich_S said: Nigel "helped" me install it on my board. Did he drill a large screw right through the pedal into the board? Link to comment Share on other sites More sharing options...
Rich_S Posted September 17, 2022 Share Posted September 17, 2022 LOL. no. I mount my pedals by putting longer screws through the board and into two of the four back cover plate holes. The board needed two new holes to match the Halo's dimensions. I drilled them, because you need opposable thumbs to work the drill. Link to comment Share on other sites More sharing options...
Dutchman Posted September 18, 2022 Author Share Posted September 18, 2022 14 hours ago, Rich_S said: LOL. no. I mount my pedals by putting longer screws through the board and into two of the four back cover plate holes. I switch pedals to often to bolt them down. There is a system you may find easier to screw them down, I built one for a local, it was spendy but solid! https://www.sweetwater.com/store/detail/DUO-24-TR--temple-audio-duo-24-templeboard-temple-red Link to comment Share on other sites More sharing options...
Disturber Posted September 19, 2022 Share Posted September 19, 2022 On 9/18/2022 at 1:58 AM, Rich_S said: LOL. no. I mount my pedals by putting longer screws through the board and into two of the four back cover plate holes. The board needed two new holes to match the Halo's dimensions. I drilled them, because you need opposable thumbs to work the drill. I'm just glad the cat didn't do the drilling. 😄 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.