Callaham

Sugartune

New member
Supporter
Who's bought their stuff and what did you think?

I recently acquired a '93 Special that has the Callaham bridge added. Playing it unplugged, it sings and just sounds awesome. It's my best sounding unplugged solidbody, by far.

I play that, then grab my stock Studio Custom and it sounds good, but nothing quite like the Special.

I'm sure there are a few factors involved (Special has a stainless steel pickguard, flat top, weighs about 3 pounds more than the Studio), but do those bridges really make that much difference?

My Newport also has the Callaham front roller and main string shaft upgrades, which my tech seems to enjoy. I have nothing to compare it with though.

Also, which bridge is it that works with Hamers, specifically '05 Studio Custom......

ABR 1 w/ Vintage Studs

ABR 1 w/Nashville Conversion Studs

ABR 1 w/Metric Studs (Guessing not that one for sure)

Thoughts on the tailpiece? Go whole hog, or does the bridge itself offer a big enough improvement?

Also thinking about their American Standard Hardtail bridge for my tele body/strat neck cab-style tele-thingy (Mattocaster, actually...) Any thoughts there would be sweet!

Cheers!

 
Last edited by a moderator:
I did the bridge with ABR-1 conversion studs on my '61 RI SG and it woke that guitar slap UP. Better tone all around, but best in the top-end. More high-end clarity without adding any harshness or brittleness which have been B.A.D. with a SG. Amazing difference. I love their stuff, but these days, for Strat blocks, I'd just as soon get a Guitar Fetish steel or brass block.

I'd think you'd either have to go with the conversion studs, or the metric... Ah crap, I know the tailpiece is metric, but now I can't remember on the bridge. /emoticons/default_rolleyes.gif Never mind, it's metric. Yep.

I'm pretty sure.

 
Cool! As for blocks, don't have a trem, but I do appreciate the suggestions.

Did you do the tailpiece as well?

I'm really starting to believe these upgrades are really worth it. Before I was all "m'eh", but now I'm all like "Hmmm"...

Really? Metric? I didn't think anything US used metric.

 
Callaham makes fine hardware. My YJM has had a Callaham trem for a decade (though l recently replaced the saddles with Glendale saddles).

My 96 TELE RI has a Callaham "low-profile" bridge. Major improvement over the stock bridge. It intonates perfectly and added some noticeable, bottom-end chunk. I didn't bother adding the two extra screws.

I'm trying to decide whether to use a Callaham ABR or the TonePros equivalent on my Ultimate. Might just be easier for Mike to use TonePros, since they use the same-sized inserts as Schaller.

 
Who's bought their stuff and what did you think?

I recently acquired a '93 Special that has the Callaham bridge added. Playing it unplugged, it sings and just sounds awesome. It's my best sounding unplugged solidbody, by far.

I play that, then grab my stock Studio Custom and it sounds good, but nothing quite like the Special.

I'm sure there are a few factors involved (Special has a stainless steel pickguard, flat top, weighs about 3 pounds more than the Studio), but do those bridges really make that much difference?

My Newport also has the Callaham front roller and main string shaft upgrades, which my tech seems to enjoy. I have nothing to compare it with though.

Also, which bridge is it that works with Hamers, specifically '05 Studio Custom......

ABR 1 w/ Vintage Studs

ABR 1 w/Nashville Conversion Studs

ABR 1 w/Metric Studs (Guessing not that one for sure)

Thoughts on the tailpiece? Go whole hog, or does the bridge itself offer a big enough improvement?

Also thinking about their American Standard Hardtail bridge for my tele body/strat neck cab-style tele-thingy (Mattocaster, actually...) Any thoughts there would be sweet!

Cheers!
I got their Tele parts kit for a Japanese Paisley Tele I was upgrading (it now also sports Bardens and an awesome flame maple neck from the Matthai). My reaction: their stuff is really great...the bridge, the electronics, the jack....all top-notch.

 
Who's bought their stuff and what did you think?

I recently acquired a '93 Special that has the Callaham bridge added. Playing it unplugged, it sings and just sounds awesome. It's my best sounding unplugged solidbody, by far.
I have 2 LP Traditionals that I got new in 2012. Nice enough stock, but more than anything the angle of the strings from bridge to tailpiece sort of annoyed me and so I got ABR-1's and the tailpieces for them. Had Bob Peterson in Port St Lucie do the conversion, and while they weigh even more than they did (they were on the heavy side already so what's another 1/2 pound or whatever), you used the word that came to my mind when thinking of the difference: they sing more.

While I don't think the difference is as dramatic as Callaham claims on his site, I do think there is a noticeable difference and improvement at least on LP's. Will that be an improvement on every guitar? A lot of factors there that could go either way, but he seems to have very high quality stuff, so if it's done right, it probably will be better than what comes from a 'mass production' manufacturer.

I also enjoy his blunt directness on his site. /emoticons/default_smile.png

As for 'best sounding unplugged solidbody', for me, it's still my Anderson. It's chambered, so maybe that doesn't count, but close enough for me. It's just ridiculous. But the Callaham stuff definitely lit up those LP's.

 
I've got Callaham steel bridges on my '74 SG Special and my '08 Firebird V. Love what steel does for a guitar that's dark or muddy sounding - really makes 'em more articulate. I bought a Callaham tailpiece also, put it on the SG Special for an extra dollop of clarity and sustain. Tried that TP on the FB-V, but that was a little overkill as that's already a pretty bright, cutting guitar. Wound up going back to an older zinc TOM TP that Jay/Murkat recommended (one of the older heavier Gibson models made by Schaller) for that guitar as it restored some thickness/balls.

Man we're lucky to have Jay around - man knows his stuff! /emoticons/default_wink.png

 
Got a Callaham bridge on my AmStd Tele, a Callaham trem block / trem arm and bridge saddles on my AmStd Strat and a Callaham Bigsby roller shaft on my Newport - all top notch stuff that makes a difference! Highly recommanded!

 
Back
Top