Studio specifications

A

avemari

New member
Specifications:

TOP

Material:Flame Maple

Configuration:Arched

Thickness:5/8

BODY

Material:Mahogany

L, W, T:16

Binding:N/A

 Good evening forum    Could someone tell me what the       L,W.T:16  means in the specifications    i have asked a few people and no one has been able to answer           Thanks in advance         rudy 

 
It means that Hamer couldn't market well on the internet either.

The 16 is probably the number in dollars they gave some high school kid to built their site.

I don't have a Studio around to measure, but there's no way they're 3" wider than an LP, right?

 
Not by any means an expert, but I do have a Studio to measure.

My '95 Studio measures about 16" long x 12 3/4" wide x almost 2" thick.

Top appears to be right at 5/8" thick.

All measurements are approximate as I don't care to scratch it up just to answer this ?.

So in answer to OP what the  "L,W.T:16  means in the specifications"    

The 16 refers to length of body.

W & T would be width & thickness of body.

As for the :, if you look at the Hamer web site you will see that they used a colon after every item when describing the guitars.

According to my copy of The Little English Handbook 8th edition. that is a correct usage of a colon.

Why the web folks didn't fix the same mistake of only stating length but not thickness or width for every guitar listed on the site is a good question but not a biggie to me. And probably not  much concern to many as it's been that way for as long as I been going to that site.

 
Hbom said:
Not by any means an expert, but I do have a Studio to measure.

My '95 Studio measures about 16" long x 12 3/4" wide x almost 2" thick.

Top appears to be right at 5/8" thick.

All measurements are approximate as I don't care to scratch it up just to answer this ?.

So in answer to OP what the  "L,W.T:16  means in the specifications"    

The 16 refers to length of body.

W & T would be width & thickness of body.

As for the :, if you look at the Hamer web site you will see that they used a colon after every item when describing the guitars.

According to my copy of The Little English Handbook 8th edition. that is a correct usage of a colon.

Why the web folks didn't fix the same mistake of only stating length but not thickness or width for every guitar listed on the site is a good question but not a biggie to me. And probably not  much concern to many as it's been that way for as long as I been going to that site.
Click to expand...
If L, W, T:16 and L = 16 then why have W and T and a colon?

Perhaps I don't know my colon as well as you do yours but I have seen a freshwater starfish in the pool. 

 
Ting Ho Dung said:
If L, W, T:16 and L = 16 then why have W and T and a colon?
Click to expand...
Ting, I can't play guitar. I can't explain the difference between Jesus and Muhammad. I can't code a website. And that's just part of a long list of things I can't do.

So I make no effort to explain why web designers do or don't do what any reasonable person would think they should do. Or why they never fixed what is an obvious mistake.

Nor will I ever believe that the correct or incorrect use of a bunch of colons had much to do with the demise of Hamer Guitar.

And I don't know much about colons, but I do have this little book that I try to use to keep myself from looking like a total fool all the time.

I was only trying to give my thoughts on the OPs question.

 
Hbom said:
Ting, I can't play guitar. I can't explain the difference between Jesus and Muhammad. I can't code a website. And that's just part of a long list of things I can't do.

So I make no effort to explain why web designers do or don't do what any reasonable person would think they should do. Or why they never fixed what is an obvious mistake.

Nor will I ever believe that the correct or incorrect use of a bunch of colons had much to do with the demise of Hamer Guitar.

And I don't know much about colons, but I do have this little book that I try to use to keep myself from looking like a total fool all the time.

I was only trying to give my thoughts on the OPs question.
Click to expand...
I was trying to make it into an algebraic equation. 

All Colons aside, looking at the website, it appears that there probably should have been 2 more dimensions per guitar but only one was supplied which was the length. So they are missing the Width and the Thickness dimensions which would have been separated by commas in the righthand column. 

 
You must log in or register to reply here.
Back
Top