I will be honest, I am very lazy when it comes to electronics - I can sit for a few minutes and noodle around, or tweak some pre-programmed sounds, but I would get frustrated if I had to do too much to find those "right" sounds.The bassist in my band uses one with his guitar setup when he does guitar stuff with others. He's a total gearhead tone junkie and loves his. He keeps trying to get me to buy one, but I'm happy with my TC Nova System.
I will caution you that TC Electronic seems to apply a logic to their user interfaces that requires some deep manual reading and a lot of patience. The delays and such in the G System are allegedly the same as on the Nova System, and if so it is worth the work, as i LOVE mine.
A hum issue? Wow, that concerns me as I have the older type looping on my Shiva - its the first year model. /emoticons/default_smile.pngI had one and could not get rid of ground loop hum when using it in the four cable setup. The software editor was cool but I HATED programming it manually. If you are even half as lazy as you claim pass. It is built like a fucking tank though.
It's fine if you just run it in the fx loop. It gets wierd when you hook it up via the 4 cable system so you can run stuff like compressors, phasers, wahs, before the preamp where they sound best. Some folks beat the ground loops with balanced cables and Ebtech Hum Eliminators but I never had much luck. If the BB was a bit much you'll hate the G System. I have a G Sharp for sale /emoticons/default_blink.png .A hum issue? Wow, that concerns me as I have the older type looping on my Shiva - its the first year model. /emoticons/default_smile.pngI had one and could not get rid of ground loop hum when using it in the four cable setup. The software editor was cool but I HATED programming it manually. If you are even half as lazy as you claim pass. It is built like a fucking tank though.
Is there a way around the hum issue?
Stike, how close are you to Charlotte? Kim Keller mentioned your name as someone who might be able to assist me with a possible restoration of my 86 Chaparral???It's fine if you just run it in the fx loop. It gets wierd when you hook it up via the 4 cable system so you can run stuff like compressors, phasers, wahs, before the preamp where they sound best. Some folks beat the ground loops with balanced cables and Ebtech Hum Eliminators but I never had much luck. If the BB was a bit much you'll hate the G System. I have a G Sharp for sale /emoticons/default_blink.png .A hum issue? Wow, that concerns me as I have the older type looping on my Shiva - its the first year model. /emoticons/default_smile.pngI had one and could not get rid of ground loop hum when using it in the four cable setup. The software editor was cool but I HATED programming it manually. If you are even half as lazy as you claim pass. It is built like a fucking tank though.
Is there a way around the hum issue?
Thank you for the input, your situation seems close to what I might have to deal with if I go with a G System.I have probably played 100 shows with a Shiva/G-System setup. I have a real love/hate relationship with it. Its integrated nature makes a lot of things easy and simple.
However:
In general, there is not enough headroom on the inputs. I have to put the input gain below unity on my Les Paul with '57 humbuckers (not exactly screaming high-output pickups) in order to avoid clipping the input D/A. As a result, I now run my guitar directly into the Loop 1 return, bypassing the entire front end digital section. This works for me since I prefer an external compressor and wah, and don't need all four switching loops.
The headroom on the back end has similar problems. With my Shiva, I have to use a line-level shifter to pad the loop send signal way down, and I still have to run the channel volumes (which control loop send level at the amp) really low to avoid clipping the G-system's back end input.
I have had some hum problems, but the aforementioned line-level shifter is a transformer isolation unit which also eliminates ground loops, so that is a solved problem for me. On my Fryette Sig:X, I have had no hum problems without an isolator (and no loop signal level issues either).
As you can see, I have made some compromises to get this system to work in my case. Why go to all the trouble? Because there is no other way I can get the same functionality with any other unit at this price ($850 used in my case) and with only a single rack space. A similar setup with a G-Major, foot controller, and loop/control switchers would cost double and require additional rack space that I have no desire to haul.