The Virtuoso Thread

DarrenD

New member
These are some Virts known to be made:

Red sustain block with slanted single coil:

redwithsustainblock.jpg


Jim O'Connor painted celestial with a Floyd:

CelestialGraphicVirtuoso.jpg


Snakeskin with a Floyd

Snakeskin.jpg


Natural quilt with Floyd:

Naturalquilt.jpg


Black with sustain block and slanted pup:

Blackwithsustainblock.jpg


Red/Purple sparkle with Floyd:

redsparklevirt.jpg


Lefty Multicolor with Kahler:

multicolorlefty.jpg


Marble with Floyd(sorry for bad pic):

BofQHrQB2kKGrHqUOKikEubES1w8HBLnn3mTf6_14.jpg


Here's a red one with Floyd:

Supposedly around 24ish are made. Anybody else have more goodies?

 
Last edited by a moderator:
The marble virt was recently sold for around 3k after being on the market for a while. The multicolor was sold by Ed Roman. The black one was listed here a few years ago, as the red sparkle.

The other 20 are most likely hidden in a few closets and under beds. I remember there being a guy on youtube playing a red one with a floyd.

 
Didnt someone here have a white one, and a korina one that had the last couple frets knocked off?

 
The multicolor was sold by Ed Roman.
Actually, Ed copied the pic from here. I don't believe he ever held/sold that one! As far as I know, that one is still in the Midwest.

Got to see a REALLY cool Virt today...#5 999, I think.

I'll post a pic when I get back tomorrow.

 
็็How long the neck scale of Vertuoso as 36 frets ? Is it master of 27 frets Right? It can make triple octave for this guitar. Who ever use this model in studio album yet? COOL.....

 
็็How long the neck scale of Vertuoso as 36 frets ? Is it master of 27 frets Right? It can make triple octave for this guitar. Who ever use this model in studio album yet? COOL.....
The virt had a 26.5 scale length, so frets 24-36 were much easier to access than the standard 25.5 scale.

I used to have a Washburn EC36 (another amazingly crafted guitar by Steve Davies and Washburn) that I modified to an Uli Roth style by removing some of the higher frets and making them whole notes because frets 29-36 were virtually unplayable. I will post a pic when I find it.

 
The multicolor was sold by Ed Roman.
Actually, Ed copied the pic from here. I don't believe he ever held/sold that one! As far as I know, that one is still in the Midwest.

Got to see a REALLY cool Virt today...#5 999, I think.

I'll post a pic when I get back tomorrow.
You were lookin' at the number upside down....

More like 0005 in my view from the drivers seat /emoticons/default_laugh.png

Mark

(however I don't have a photo so maybe it never happened...)

 
One from the Chicago festivities. Mr. Hamer brought this one along (sorry for cell phone camera pic. Maybe someone else will have a better one to add later...):

PaulHamerVirt.jpg


PaulHamerVirt-2.jpg


 
Definitely more than two dozen of those were made. The korina one of Paul's was made out of korina from the Gibson factory that had been there since the fifties.

 
Yeah....I sold the marble one off (not much of a whammy user...but tracking down four was quite a feat.) Notice the one on the left has ALL small dot markers, unlike all the other Virts. The SN# pre-dates the original run of ten Sustain Block Virts and the scalloping is a lot deeper than any other one, so I'm guessing it might be a prototype?

Some tool hacked off some of the upper frets on it too in a brilliant move /emoticons/default_laugh.png

VirtsTall_WebC.jpg


 
Last edited by a moderator:
Jon - is the HB original in that Korina Virt?

I thought it had a SC-sized pickup in there originally.

That's a great collection!

 
Back
Top