Jump to content
Hamer Fan Club Message Center

Radial Tonebone Hot British Distortion Pedal


Recommended Posts

Posted

Like new in the box with adapter. Original receipt for $189.99. Awesome Marshall stack tones. Very versatile EQ system. Asking $110 shipped in the CONUS. Thanks.

Radial Tonebone Hot British Features:

* LEVEL control: Used to balance the output level between the input drive without altering any of the tonal characteristics. Works somewhat like a master volume on an amplifier.

* HIGH & LOW controls: Post distortion active tone controls that boost or cut from 12 o'clock position. Low: +/- 14.5 db @ 100Hz; High: +/- 10 db @ 4.3kHz.

* CONTOUR control: Used in conjunction with the VOICING selector switch, the passive contour control dials in the mid-center frequency for either cut in the V' position or boost in the FAT position.

* DRIVE control: Used in conjunction with the drive gain switch, drive is used to adjust the overall amount of gain to the overdrive circuit.

* TOP END switch: Switch sets the overall tonal character of the Hot British to best match the amp and it's settings. Brighter amps are normally compensated with darker settings. Bright: Boosts +6dB @ 10kHz; Flat: No boost; Dark: Cuts -6dB @ 1.8kHz.

* VOICING switch: Three position switch allows the user to jump to chunky V style scooped rhythms or huge solos in the FAT position. Fat: Mid boost - passive filter; Bypass: Flat Scooped: Mid cut - passive filer.

* MID BOOST switch: Used to fatten up the sound for more cut and sustain during solos. Also, will fatten up the sound of single coil pick-ups. High: Boosts +12dB @ 620Hz; Medium: Boosts +6dB @ 390Hz; Bypass: No boost.

* Tube: Standard 12AX7 vacuum tube inside is used in distortion stage to accentuate upper harmonics and warmth.

* Distortion: Proprietary tube hybrid distortion circuit. Wide range of distortion settings may be derived.

* Footswitch: True by-pass with red in/out status LED.

* Power Supply: 15VDC adapter (110V standard - export models available).

* Construction: 14 gauge steel construction with baked enamel coat.

* Standard package: Includes power supply, rubber stick-on feet, owner's manual.

Posted

don't know if you're interested but how bout a swap of tube driven pedals just for shits and giggles, i have an older usa made tube works real tube(butler designed) with the three band eq, currently has a nos 12ay7 in it but i can put anything in it like a jj 12ax7, be cool, harry......................

Posted

Hey Harry, I'm looking for cash mostly unless you have a Wampler Pinnacle II for trade. This might be sold off my local Craigslist anyway but you know how that goes...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...