PSA: VFE Klein Bottle V3 !!

[JGale]

https://www.indiegogo.com/projects/vfe-pedals-klein-bottle-now-in-stereo

”Here are all the features of the  Klein Bottle mkIII.

• 3 parallel FX loops that you can blend together (MIX) and feedback into each other (LOOP X)
• You can use the high-pass & low-pass filters (HPF & LPF) to limit the frequency bandwidth of any of the loops. This means you could send the bass frequencies to one effect, the mids to another, and a treble a third completely different effect. The pre-gain control (PRE) lets you set the signal strength just right for the effect(s) connected to each loop.
• Independently switch on each loop with its corresponding footswitch (ONE, TWO, THREE).
• Blend in the original dry signal (DRY) with all the active loops.
• Adjust the overall volume of the Klein Bottle with one knob (MASTER).
• Phase switches (0 - 180) let you invert the phase response to correct phasing problems created by effect circuits that are phase inverted.
• Independently set how the effects connected to the loops decay naturally when the loop is disengaged (TRAILS). You can let the feedback sends and main mix signals decay naturally, just the feedback sends, or have both cut off their signal instantly.
• Now available in MONO or STEREO versions. The stereo version will use TRS jacks to receive/send stereo signals (TIP = left, RING = right). The mono version will be user-upgradeable with the stereo mod circuit board if we raise $62k or more (estimated retail price: $99).
• Additional features: lower noise floor, LTC3261 charge pump for more clean headroom, DualMode switching with momentary & latching modes, internal makeup gain & LED brightness trimpots, plus internal switches for connecting mono pedals to both sides of the stereo loops (stereo version only)”