FS/T power amps hi fi and misc

[alpep]

took in a pile of stuff over the past few weeks and I am looking to purge some old to make way for the new.

Interesting trades welcome.

peavey m 3000 power amp. stable reliable peavey goodness $150

Pryamid pa600x power amp

Speaker Switch: The PA-600X features a switchable speaker option. By depressing speaker switch A the speakers on channel A will become operational. Speaker switch B operates speakers hooked up to channel B. For full stereo operation both switches should be depressed. Output Level Gain Controls: There are 2 separate output level gain controls. The left knob controls the gain level of amplifier channel A and the right gain level controls channel B. The unit can be rack mounted or table top mounted. The PA-600X has built-in pure aluminum heatsinks to help dissipate heat build up from the integrated circuits inside.

Specs

Continuous Power Output (both channels driven):

20 Hz to 20 KHz: 300 watts per channel (8 ohms)

1 KHz: 600 watts per channel (4 ohms)

Total Harmonic Distortion: 0.1% at rated power (8 ohms)

Frequency Response: 10 Hz to 50 KHz ± 3dB

Input Sensitivity: 1 Volt for 70 watts at 8 ohms

Input Impedance: 47 Kohms

Signal to Noise Ratio: 90dB (A-weighted)

Speaker Impedance: A, B, A + B (4 - 16 ohms)

Power Requirement: AC 115V / 230V switchable

Power Fuse: 6A / 115V or 3A / 230V

Dimensions: 480(W) × 100(H) × 273(D) mm

$125

Carvin dcm1000 1000 watt power amp

DCM1000 Power Amp

1000W bridged 4 ohms, 700W bridged 8 ohms.

• Continuous RMS per CH: 8 ohms 225w, 4 ohms 300w, 2 ohms 500w.

• Not rated "pulse power" or at 2 ohms for a few minutes like some amps

• THD 20-20kHz @ rated 90% output: 0.1%, 50% ouput 0.03%.

• High transparent 45v/us slew rate. Studio quality 100 dB S/N ratio.

• INPUTS: 1/4" balanced and female XLR balanced.

• OUTPUTS: 5-way binding post, Speakon™ and two 1/4".

• Switches: limiters, ground lift, paralleling inputs, bridge mode.

• Recessed level attenuators, clip, signal, protect and power on indicators.

• Soft-start, DC SpeakerGuard™, thermal and short circuit protection relays.

• Variable speed fan. Heavy-duty all steel construction.

• Dynamic low frequency punch with transparent high-end for uncolored sound.

• 2U rackmount 3.5"H x 10"D x 19"W, WT: 25 lbs.

excellent condition lots of bang for the buck.

$250

phase liner 400 yup you know what these are it works great and is in excellent condition. ONe of the best sounding solid state hi fi amps I know.

$250

wood cabinet for the phase linear 400 700b or 4000

good condition some minor scratches and dings $85

phase linear model 5100 series two digital synthesized tuner. I should keep this but I have too much stuff. $150

Phase linear turntable $150

Dynaco ST 150

classic made in Blackwood NJ hi fi power amp. Wood sides some minor scratcher etc. 75 watts per channel

$175

Phase liner 4000 series two peramp. great classic hi fi sound.

$200

harman kardon hk 300xm cassette player $40

harmon kardon linear tracking turntable. Not sure if I want to let this go. catch me in a weak moment

bsr real time spectrum analyser model sa-3x $50

asr systems parametric octave band eq eq-10 it works $50

e me at alpep@lostartvintage.com if you have any interest or have something to swap

thanks

[alpep]

phase linear power amp, preamp and wood cabs are gone.

I have another phase 400 if anyone is interested. I may decide to part with it.

also for those who know something about reparis

peavey 1.5 power amp huge thing DOA $100 as is heavy

early crest amp channel A is ouit (or it is set in perpetual bridged mode)

475 watts per channel $200 as is