Fulltone CLYDE Standard Wah

[robberns]

Fulltone CLYDE Standard Wah in excellent condition.
This is pre-booster/buffer that was added later.
Sounds like a way pedal should, and built like a tank.
$125 shipped in the CONUS.

From the Fulltone website:
Our Inductor is a tuned core hand-made unit using EXACTLY the same type wire and inductance as the '60's era Vox, except VERY consistent from one unit to the next. A tuned core inductor is much more expensive to make, but the end result is worth it. The only change from the original '60's Vox design is the addition of a very usable internal "Resonance Control" which is a large durable trimmer, for bass and gain adjustment, which is easily adjustable by hand without tools and with room to mark your favorite settings.

CLYDE Standard wahs sport the most authentic '60's Vox type inductor available, which happens also the quietest... our hand-wound MU-80 (80% nickel alloy) shielded Fulltone 500mH inductor. And, of course, the long-live Fulltone-1 wah pot.

The Potentiometer, the most overlooked part of the circuit, is one of the keys to a good wah wah sound and there hasn't been a proper "tapered" pot, since the '60's "Icar" in any major manufacturer's wah. This is one of the reasons the '70s, '80s, and '90s wahs are so mediocre. We've made our own I call the Fullrange pot (... ours has a double screened carbon composition track giving a 500,000 turn life span instead of the standard industry 15,000.

I don't like the original Vox-type housings that everyone uses, and I had to design and produce one that made more sense. The traditional housings don't give enough travel and potentiometer range, limiting your tonal sweep, and they have little compensation for tension or feel. The Fulltone "Clyde" uses our own custom-made 14 ga. welded steel pedal with nylon pivot points and much more travel than the conventional Vox-style ones that everyone uses. It has nylok nuts so you can adjust the tension of the treadle, and it stays that way until you change it. As with all Fulltone pedals, the "Clyde" has true bypass switching so that when it's "off" it's not coloring your sound or ruining the performance of other pedals in your signal chain.

The Clyde also has a standard 2.1mm negative center-pin AC adapter port with anti-hum filtering and protection diode.

https://www.thegearpage.net/board/index.php?media/fulltone-clyde-wah-jpg.267144/

https://www.thegearpage.net/board/index.php?media/img_6749-jpg.267145/

[HamerCustomEr]

A good deal on a solid wah!  I own two Clyde Deluxes.