Jump to content
Hamer Fan Club Message Center

PIF - AKG B 29 MicroMic Series II Power Supply


Recommended Posts

Posted

Hey,

If anyone can use these i have one in my hand and i think another one in a box somewhere.

They are unused (still in the box) AKG B29 power supplies for the MicroMic Series of AKG microphones. Note that these are NOT the B29L. Although they have not been used, they've been sitting in boxes for a while, and i don't have an AKG MicroMic series mic to test them with.

B29-instr.jpg

The best i could test it is as follows: When i connected it to a mixer with no input, this one has a scratchy pot on the left channel. I can blast some tuner wash through it if you have a need for two mics, otherwise, the pot on the right channel doesn't make a peep (or pop, rather...). Both channels do pass signal, but i can't test them with the actual mics they were designed for.

I'd have to track down the other unit to see how it is working if i actually do get two responses for these.

Let me know.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...