Victor (Fret Friend) Posted February 28, 2011 Posted February 28, 2011 Does anyone know the size? Plenty cheap on eBay just need confirmation of size. TIA, Vic...
Jem Posted February 28, 2011 Posted February 28, 2011 5/16" which would equate to just under 8mm - which you should get away with unless some clowns chewed it up previously.
Victor (Fret Friend) Posted February 28, 2011 Author Posted February 28, 2011 5/16" which would equate to just under 8mm - which you should get away with unless some clowns chewed it up previously. It's fine so 8mm it is. Ta very muchly
Bob B Posted March 21, 2011 Posted March 21, 2011 Most any 5/16" socket should work.If it will fit into the hole. On my 81 Sunburst, the channel was too small for a socket to fit. A Gibson 5/16" truss rod wrench fit perfectly.
Victor (Fret Friend) Posted March 21, 2011 Author Posted March 21, 2011 I bought an 8mm truss-rod wrench for around $5 off of ebay. Works a treat
Question
Victor (Fret Friend)
Does anyone know the size? Plenty cheap on eBay just need confirmation of size. TIA, Vic...
5 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.