Jump to content
Hamer Fan Club Message Center

FS/FT: Jackson Dinky Reverse, parts, Ampeg VH-140C


Recommended Posts

Posted

Got a bunch of things collecting dust that need to go to someone that will get some use out of them!

First up is a 1993 Jackson Dinky Reverse. This one is in case baby, time capsule condition. There are only a few minor blems; Some pick swirling, a small ding on the back, a scratch near the output jack, and the former owner was apparently having some trouble with the high E buzzing due to a low nut, but rather than shim the nut, he attempted to shave the first fret down a little bit. This has very little effect on the playability and action of the guitar. I have since shimmed the nut and that solved the issue. Has the JT-590 tremolo, which is the basic Schaller but branded as Jackson. Superior to the JT-580 and JT-580 LP, which are rebadged TRS trems that come on all of the mid level Jacksons today. Comes with OHSC. $300 plus actual shipping.

Next is an Ibanez RG 560 body. She's been through some battles, but still has some love to give. Comes loaded with electronics, but one of the half shafts of the volume pot broke off, and the output jack is intermittent. The pickups I can only assume are V2, and 2 S1's, the middle of which is reversed polarity for humbucking when combined with neck single coil or the split coil of the bridge humbucker. Also includes the neck plate and screws. Does not include the tremolo screws. $50 plus actual shipping. I'll consider parting it out as well.

I've also got a lefty Floyd locking nut in cosmo black off of a Japanese made Ibanez RG470L. Comes with pads, string retainer bar, and the 2 through screws. $20.

And, finally, I have too many high gain screamer heads, so I need to get rid of my Ampeg VH-140C. These were made in the early 90's and are highly regarded amongst the metal community. It is solid state, but it screams! This one is in good shape, with only a few blems in the tolex. However it is missing the top handle, Ampeg logo, and one of the bottom rubber feet. $400 plus actual shipping.

Pictures of all of these are available at my flickr page at http://www.flickr.com/photos/33701682@N05/ . Shipping is from Portland, OR, 97214. I can do PayPal or MO.

I'll also consider trading for an RG 565, RG 565R, Ibanez Ibz/Usa F3 pickups, Heartfield Talon V, Fender HM, Hamer Centaura, Lee Jackson XLS head.

Posted

I have a VH-140C, and it's the one amp I'll NEVER part with. It'll do classic 80's Whitesnakey stuff as well as Pantera better than anything else.

Posted

Had a VH-140C in the mid-90s myself. +1 what Scooter said. The clean sound with the on-board chorus ain't that bad neither. Quite nice actually. I used that chorus to get a Skid Row-esque sound that was simply brutal.

Posted

Had a VH-140C in the mid-90s myself. +1 what Scooter said. The clean sound with the on-board chorus ain't that bad neither. Quite nice actually. I used that chorus to get a Skid Row-esque sound that was simply brutal.

Hey guys, thanks for helping my sales pitch! It is a good amp, I just have too many. Along with this amp, I have a Crate Stealth, Lee Jackson XLS-500, Crate Blue VooDoo, and a Fender Roc Pro. I'm somewhat of a connoisseur of budget screamer amps!

Posted

Do you have any other lefty parts?

No, sorry. This was left over from a reverse headstock conversion project.

  • 4 weeks later...
Posted

Bump! Wow, I can't believe none of this was claimed. I also have a Roland SDE-1000 up for grabs. It's an old school delay unit from the mid 80's. $75.

Also wouldn't mind trading for a fixed bridge shredder.

  • 1 month later...
Posted

Roland SDE and RG 560 body are gone.

Everything else still available.

Also will consider trading for/towards a PowerMac G5 dual 2.7 processor, Charvel 550XL, Kramer Pro Axe or Stagemaster, Sennheiser e906 and e604 mics, Washburn USA MG series, and Ibanez Angels Depart USA Custom, and of course a USA Californian!

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...