Devnor Posted July 26, 2019 Posted July 26, 2019 My Cali has a few too many stripped saddle set screws. Anyone ever installed a gotoh or OFR into a Cali? Ibanez edge?
diablo175 Posted July 26, 2019 Posted July 26, 2019 1 hour ago, Devnor said: My Cali has a few too many stripped saddle set screws. Anyone ever installed a gotoh or OFR into a Cali? Ibanez edge? Yeah, a few 😆 You can use an OFR IF you also purchase the shortened (38mm) string lock bolts. I recommend going directly to Schaller for them. Contact info below. Takes a few days longer to ship from Germany but worth the wait. You know you're getting the real deal. I would imagine the same can be said about the Gotoh, if it uses the same diameter/length string bolts. Not sure how you determine that. Gotoh doesn't have that spec listed. Schaller GmbH Dr. Lars Bünning Geschäftsführender Gesellschafter Managing Director – Owner An der Heide 15 92353 Postbauer-Heng Deutschland/Germany Nbg. HRB 22913 Steuer-Nr.: 201/138/00055 USt-IdNr.: DE 250 628 367 Tel.: 0049/(0)9180 910 0 e-mail: Dr.Buenning@schaller.info www.schaller.info
Devnor Posted July 26, 2019 Author Posted July 26, 2019 Only thing I like about Gotoh is the trem arm holder. Which block and nut do you use on your calis?
diablo175 Posted July 26, 2019 Posted July 26, 2019 8 minutes ago, Devnor said: Only thing I like about Gotoh is the trem arm holder. Which block and nut do you use on your calis? I use a R2 locking nut and a 37mm block. You know you can get the same type of push in arm socket from Floyd Rose, right? https://floydrose.com/products/frtapi?variant=29837630034
Devnor Posted July 26, 2019 Author Posted July 26, 2019 1 hour ago, diablo175 said: You know you can get the same type of push in arm socket from Floyd Rose, right? Yeah but I need like 10 of those 😎
diablo175 Posted July 26, 2019 Posted July 26, 2019 3 minutes ago, Devnor said: Yeah but I need like 10 of those 😎 10 push in arms and receiver assemblies? 🤔
Devnor Posted July 26, 2019 Author Posted July 26, 2019 Just now, diablo175 said: 10 push in arms and receiver assemblies? 🤔 At least...but for this project I think I'm going to go with all ruthenium hardware
diablo175 Posted July 26, 2019 Posted July 26, 2019 2 minutes ago, Devnor said: At least...but for this project I think I'm going to go with all ruthenium hardware If that had a reversed head stock...
Devnor Posted July 26, 2019 Author Posted July 26, 2019 I think I've seen ruthenium on a Shishkov somewhere just didn't know where to order it. So thank you very much!
scottcald Posted July 28, 2019 Posted July 28, 2019 That Cali is awesome, and I'm not a green guitar guy.
Question
Devnor
My Cali has a few too many stripped saddle set screws. Anyone ever installed a gotoh or OFR into a Cali? Ibanez edge?
10 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.