Vibro Champ 1 button footswitch ?

[hamerican gigolo]

I have a '67 BF Vibro Champ & I desire a footswitch for the trem. The Fender vintage style is a lil pricey. I was wondering if anyone knew of a cheaper alternative??? I thought about buying the economy Fender switch & using an RCA plug, but I can't find info that it would be compatible. I need a 1 button footswitch that is on/off with a latching push button switch. 

Any ideas or suggestions would be greatly appreciated. 🤗 

[Dutchman]

An old Peavey footswitch will work with an adaptor or new RCA installed. They used to be Cheap at pawn shops. 

[hamerican gigolo]

" Used to be " is the operative phrase... 😞

[crunchee]

Fender sells brand-new ones for $44.99, and Sweetwater has them for $32.99; all with the vintage correct RCA plug already attached.  Unless you're on a very tight budget, I don't think you're gonna find them much cheaper; and with used, you'd probably have to spring for full shipping.  There's bound to be a seller with new stock that can ship for cheap or for free, because otherwise that could be a good chunk of your expenditure.  The only alternative I can think of is to go hang out at pawn shops. 

[Dave Scepter]

It's pretty easy to use a adapter or cut and install a RCA end

https://www.tubesandmore.com/sites/default/files/uc_products/p-h477_peavey.png or 

[HAMERMAN]

Sweetwater has this one for $13.69:

https://www.sweetwater.com/store/detail/099-4049-000--fender-single-button-on-off-footswitch

 

You would still need to adapt from 1/4" to RCA $3.75:

https://www.sweetwater.com/store/detail/GPR104--hosa-gpr-104-1-4-inch-female-ts-to-male-rca-adapter