hamer logo

[iownit4]

hey guys ..I need a Hamer logo for a Hamer blitz headstock ( 3 on a side tuning pegs ) where can I get 1 ..thanx Rob NYC

[sw686blue]

hey guys ..I need a Hamer logo for a Hamer blitz headstock ( 3 on a side tuning pegs ) where can I get 1 ..thanx Rob NYC

Trade you a logo for the blue Studio Custom.

[Jem]

Try the factory although if you're after a 'stadium' size logo they 100% don't have any left.

If all else fails try Mike at The Decalshop he does Hamer but the last time i looked he didn't include the 'USA' bit.

Jem.

[Steve Haynie]

You could find something to add the "USA" here at the Letraset web site. Unfortunately, the Bookman Bold Italic font that is used for the Hamer logo does not show up in the listings.

I also see that they do custom transfers with an minimum order of 25 sheets. That would be about 500 stadium logos or 750 checkerboard logos.

[JohnnyThunders]

You could find something to add the "USA" here at the Letraset web site. Unfortunately, the Bookman Bold Italic font that is used for the Hamer logo does not show up in the listings.

I also see that they do custom transfers with an minimum order of 25 sheets. That would be about 500 stadium logos or 750 checkerboard logos.

I need some of these also for two re-finishes I'm going to do, anyone find any?

What is the correct font type and size for the Logo incase I need to get some made?

[Steve Haynie]

The correct font is "Bookman Bold Italic." As for the point size, uh... I dunno. I could look it up in an old Letraset book if necessary.

[serial]

The correct font is "Bookman Bold Italic." As for the point size, uh... I dunno. I could look it up in an old Letraset book if necessary.

They had a few different sized ones too. The original '77 era logo is smaller than the 78-84 and the stadium logo is even bigger. I have a sheet or two of the correct font/style dry transfers, but they're in black-I used one set's worth for something already though.