Jump to content
Hamer Fan Club Message Center

PA amps and other stuff


zzdat

Recommended Posts

Posted

;)

I finally got tired of renting and bumming PA gear.

This is what I have comming soon.

2 TXD 251 2 -15 Turbosound subs, 4 ohm 600w RMS ,1200w peak

4 TXD 121 horn and 12 main cabs, 8 ohms 300w RMS, 600w peak

I got these because first of all they just sound right. The subs can be stood up on end to use with one top cab on a pole at smaller places, then the subs can be laid on their side and two of the top cabs can be mounted on one sub side by side with poles for an array.

Mixer is a 16 channel Allen & Heath Mix Wizard 3.

Main processor is a DBX Drive Rack, along with a Samson Quad gate, and an extra stereo 1/3 octave eq for on the fly tweaks.

OK - I'm going crazy looking at power amps. I need two amps that will do close to 600w RMS at 8ohms and close to 1200w at 4 ohms. The trick is they need to be in the 600 to 700 dollar range and sound good.

I've been looking at the Carvin DCM 2500 and 2750, they look good for the bucks.

The Yamaha PS5000 and 7000 look good for the money.

What else is out there that sounds for the kind of money that I want to spend.

BTW, Gear heads looking for PA and Recording gear should really check out

Muzeekworld.com for killer prices on gear. There in Huntinton Beach CA.

Cool Beans

Gene

Posted

Take a good look at the QSC PL series. Extremely powerful for their size and weight, and they put out a lot of watts for an ampere of juice out of the wall. Very reliable and conservatively rated. I believe there's one right at your power point/price range. PL3002 maybe?

Guest galejt
Posted

Try this guy. Don't talk politics with him. "No amps for you!" could result.

He regularly sends out a catalog by email but he isn't listing the prices anymore. As I remember it, they were pretty good on QSC amps.

Email me and I'll forward you the latest data he sent me.

JIm

Lord Valve

VISIT LORD VALVE'S WEBSITE: http://www.nebsnow.com/LordValve

Specializing in top quality HAND SELECTED NOS and

current-production vacuum tubes for guitar and

bass amps. Good prices, fast service.

QSC amps, RNC compressors, lots of other good stuff!

NBS Electronics, 230 South Broadway, Denver, CO 80209-1510

Phone orders/tech support after 1:30 PM Denver time at 303-778-1156

I'm not an asshole, but I *play* one on the Internet. - Lord Valve

Edited to add: Don't bother with email. Call him.

Posted

I prefer the Carvins. Usually there are great deals on ebay for the DCM series. Get the newer models with the Speakon connectors. These later models are built differently (and a little more reliably) than some of the older ones.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...