Jump to content
Hamer Fan Club Message Center
  • 0

graph tech strat saddles? good or bad?


Jimbilly

Question

5 answers to this question

Recommended Posts

Posted

I’ve used them on Strats. After repeated attempts, they don’t stay installed for long. 

Combined with a properly cut/lubricated nut, they can help a trem stay in tune. To my ear, they impart a bit of a, “sponginess”, to the tone that is not pleasing. If you have a particularly bright Strat you may like the effect. Don’t get me started on the TOM saddles, LOL. 

Personally, for vintage Strat trems I prefer Highwood saddles. They’re designed with a small string channel and hex screws that don’t dig into the palm. Combined with Gotoh staggered, locking tuners my EJ Strat rarely loses tuning.

ETA:  I see now that you have an American Std trem. Let us know how you like the stock saddles. IME they’ll be an improvement. 

Posted
On 4/24/2025 at 12:28 AM, RobB said:

ETA:  I see now that you have an American Std trem. Let us know how you like the stock saddles. IME they’ll be an improvement. 

FWIW: I had great results with the Callaham block for the American Standard trem. It allows for use of their trem arm (no slop). I was also partial to their bent steel saddles, but you may prefer the American Standard saddles. 

Posted

I loved the Callaham bent steel saddles much better than the AmStd blocks. Zingier and less string breakage on my Strat. I also tried the Graphtec String Savers. They REALLY eliminated string breakage but they did something to the tone like @RobB said.

Posted

I love graph tech saddles and they are the first thing to go into my gigging guitars that aren’t Duotones (along with Schaller locking tuners). For tune-o-matic Hamer Artists and LP, and also strats. 
To me, there is no perceived tonal difference that is not eclipsed by the vast improvement in tuning stability and string breakage.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...