elduave Posted January 25, 2009 Posted January 25, 2009 Hamer parts preferred, all considered. Thanks.Does this sound about right, Stike? The pickguard I have has a chipped corner, so I guess I'll have one made. BTW, yes, I'm being cryptic, but I wanna surprise y'all with the finished product!
geoff_hartwell Posted January 25, 2009 Posted January 25, 2009 Hiya- I have a set of 3x3 schallers off of a duotone. Is that what you're looking for? Geoff
serial Posted January 25, 2009 Posted January 25, 2009 I have a set of Hamer branded tuners from an '83 Phantom as well as a sustain block base.
Guest pirateflynn Posted January 25, 2009 Posted January 25, 2009 It looks like you're all set with the tuners but I think I have a couple sets of late '70's Grovers. Let me know.
David B Posted January 25, 2009 Posted January 25, 2009 I have Shaller 3 x 3 tuners from an '81 Sunburst.
elduave Posted January 26, 2009 Author Posted January 26, 2009 Thanks y'all. Let me see if Steve and I can work something out. Steve, I'll PM you.
cmatthes Posted January 26, 2009 Posted January 26, 2009 Hamer parts preferred, all considered. Thanks.Does this sound about right, Stike? The pickguard I have has a chipped corner, so I guess I'll have one made. BTW, yes, I'm being cryptic, but I wanna surprise y'all with the finished product!I can help ya with the tuners...Ya cryptic beeyotch!!
elduave Posted January 26, 2009 Author Posted January 26, 2009 Hamer parts preferred, all considered. Thanks.Does this sound about right, Stike? The pickguard I have has a chipped corner, so I guess I'll have one made. BTW, yes, I'm being cryptic, but I wanna surprise y'all with the finished product!I can help ya with the tuners...Ya cryptic beeyotch!!Are you kidding? I've been calling you for days (and texted) 'cause I need (!) to share this, AND, the guitar next to mine in the pic (from Stike) I can't IMAGINE going to anyone but you! OK, so tuners Chris, half a sustain block from Steve, and I guess I'll pull the triple coil out of my Iceman. I should have the rest.
cmatthes Posted January 26, 2009 Posted January 26, 2009 Ha!I'm skiing with the fam in WVA. No cell phone reception up here, and spotty internet. Great skiing and perfect weather though!(I actually have a set of Hamer-branded 3x3 for ya that I dug up)
Stike Posted January 26, 2009 Posted January 26, 2009 Hold steady on the tuners, I'm 99% sure I have a set. Dave, send me that chipped guard, it'll work as a template.
paults Posted January 26, 2009 Posted January 26, 2009 Not to be the master of the obvious, but Prototypes and Phantoms have a single coil next to the humbucker, not a triple coil pickup. But, if you are cryptically asking for a triple coil mounting ring, play on!
hamerhead Posted January 27, 2009 Posted January 27, 2009 Hey El Guapo - I'll swap ya 6 shiny new Sustain Block saddles for a whatever-ya-got-laying-around Switchcraft 3-way switch. I need an output jack, too.Where do I send 'em? (I'm not sure if I have the screws and springs - I'll have to check....)
serial Posted January 27, 2009 Posted January 27, 2009 Could that be a match made in heaven? HH's saddles and my sustain block?In the words of Hannibal Smith...
elduave Posted January 27, 2009 Author Posted January 27, 2009 hammerhead + serial=Sustain Block for Duave! I'll see if my repair guy has the switch and jack for you HH and serial, let me know what we can work out on the SB base.
elduave Posted January 27, 2009 Author Posted January 27, 2009 PM's sent to hamerhead and serial. Thanks!
stobro Posted January 29, 2009 Posted January 29, 2009 I can't wait to see what you've got cooking! I have all the parts you're looking for, but they're all attached and I hate to break up a set...
serial Posted January 29, 2009 Posted January 29, 2009 I can't wait to see what you've got cooking! I have all the parts you're looking for, but they're all attached and I hate to break up a set... That's BEAUTIFUL!!!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.