Question for ex Hamer employee's

[gatorbyte007]

Hey Guys. Im trying to find where Hamer sourced the #2 black flat head screws used for the rear control plates. I checked the obvious places like stew Mac. Any help would be awesome. Thanks Steve.

[cynic]

No idea where Hamer sourced them, but I've yet to walk into an Ace Hardware looking for small fasteners and not come out with exactly what I needed. I've found those screws at two different stores so I'd say they're a common-stock item.

[gatorbyte007]

Thanks I'll check it out. I'm looking to buy a large quantity.

[kurtsstuff]

Ace is the place with the helpful hardware folks..

[tbonesullivan]

I would have to agree here. They have always had everything I need. The hard part can be FINDING it all in those giant rows of boxes.

[Steve Haynie]

There are stores that specialize in nothing but nuts and bolts. If you can find one in your area they either have what you need or have a source for it.

[Boomerang~Junkie]

Locate your local Fastenal store.

[murkat]

same as gibson historic and early Hamer.

http://www.guitarelectronics.com/product/SCHB3L-12/Guitar-Humbucker-Mounting-Ring-ScrewsLong-Black.html

[ARM OF HAMER]

Locate your local Fastenal store.

You would be surprised at what they have.............just in stock and what they don't have they can order. I can't tell you how many things I have found there for not just guitars but for all sorts of other things as well.