Telecaster Series/Parallel with dpdt switch

[bubs_42]

I have his project going and i'm down to the wiring. I'm going with the standard 3 way switch, two pickups, but want to do Series or Parallel in the middle position. 

I found this diagram online, can anyone tell me if this correct or have a better diagram they could share? 

Also, why do they run the wire from the volume to the middle ear on the tone control? I usually put my tone cap there and my wire from the V to the T on the outside pole. 

[crunchee]

Just curious, what's the advantages of installing a DPDT mini-toggle switch, instead of replacing the three-way switch with a four-way switch?

[bruce919]

Try this...

[bubs_42]

I set my Tele's up all with 3 way, those positions are the ones I use all the time. Then I put in a mini switch for alternative "maybe i'll used that" options. @crunchee

[Hbom]

Options with a 4-way & no extra switch needed.

[Dave Scepter]

1 hour ago, bubs_42 said:

I set my Tele's up all with 3 way, those positions are the ones I use all the time. Then I put in a mini switch for alternative "maybe i'll used that" options. @crunchee

You can always use a push/pull pot instead of the mini toggle switch

[bubs_42]

8 minutes ago, Dave Scepter said:

You can always use a push/pull pot instead of the mini toggle switch

I am one that actually uses my volume and tone knobs. I want them to be in the exact place every time. 

All good, everything is wired up. 

[Jakeboy]

I love that extra option on a Tele type..,I love cleanish rhythms in the middle chimey parallel position, then switch to the series position for the solo. Nice boost and thicker yet similar to the parallel tone.