RoyB Posted July 9, 2009 Posted July 9, 2009 Here is a Les Paul we just finished rebuilding and we thought it would make a cool video.http://www.youtube.com/watch?v=gxKyD4WtiW8
RoyB Posted July 10, 2009 Author Posted July 10, 2009 I think i remember that music from Ren and Stimpy. Ding ding ding. We have a winner
atquinn Posted July 10, 2009 Posted July 10, 2009 So the only thing original is the neck and electronics?-Austin
RoyB Posted July 10, 2009 Author Posted July 10, 2009 So the only thing original is the neck and electronics?-Austinand the hardware. The body wood was air dried for six years.
bubs_42 Posted July 11, 2009 Posted July 11, 2009 Noticed it has a shelf like a Monaco. Great looking guitar Roy. Awsome!
atquinn Posted July 11, 2009 Posted July 11, 2009 Noticed it has a shelf like a Monaco. Great looking guitar Roy. Awsome!Yup, Hamer's just keeping it old school by using the shelf. Roy,How did you come up with the body shape? Did you use another 57 as a template or did you use the original body and just correct the f-ed up parts?-Austin
RoyB Posted July 11, 2009 Author Posted July 11, 2009 Noticed it has a shelf like a Monaco. Great looking guitar Roy. Awsome!Yup, Hamer's just keeping it old school by using the shelf. Roy,How did you come up with the body shape? Did you use another 57 as a template or did you use the original body and just correct the f-ed up parts?-AustinI was lucky on this one. If you look at the photos of the wood being drawn out you will see another raw 57 next to the blank. We had both of them in for refins within two days of each other.
ArnieZ Posted July 11, 2009 Posted July 11, 2009 Very Nice!! The neck join is much different than current historic LP's. Question: How do you set the neck angle? I know Hamer has a jig they use to check that the angle is correct.ArnieZ
Jason01 Posted July 11, 2009 Posted July 11, 2009 Why was the lower horn cut off like that? To remove the neck?
RoyB Posted July 11, 2009 Author Posted July 11, 2009 Very Nice!! The neck join is much different than current historic LP's. Question: How do you set the neck angle? I know Hamer has a jig they use to check that the angle is correct.ArnieZThe Joint is the same one used by Gibson on the Historic 57 Special and Junior being a standard box joint. You don't set the neck angle in the body because the bottom of the neck joint is flat. The angle is made in the bottom of the neck tenon, so that's still factory on this guitar because we steamed the remaining body wood off the neck so we did not mess with Gibson's joint.Why was the lower horn cut off like that? To remove the neck?It's the easiest way to get the neck out without risking damage to the neck if you don't care about saving the body.
mirrorimij Posted July 11, 2009 Posted July 11, 2009 The Joint is the same one used by Gibson on the Historic 57 Special and Junior being a standard box joint. You don't set the neck angle in the body because the bottom of the neck joint is flat. The angle is made in the bottom of the neck tenon, so that's still factory on this guitar because we steamed the remaining body wood off the neck so we did not mess with Gibson's joint.Same as Hamer. Bottom of neck pocket in body is flat and the angle is milled on the neck tenon.Nice work. How does the owner think it compares in sound to the original body?
RoyB Posted July 11, 2009 Author Posted July 11, 2009 The Joint is the same one used by Gibson on the Historic 57 Special and Junior being a standard box joint. You don't set the neck angle in the body because the bottom of the neck joint is flat. The angle is made in the bottom of the neck tenon, so that's still factory on this guitar because we steamed the remaining body wood off the neck so we did not mess with Gibson's joint.Same as Hamer. Bottom of neck pocket in body is flat and the angle is milled on the neck tenon.Nice work. How does the owner think it compares in sound to the original body?He does not have it yet, but the old body had been sanded, routed, inlayed and had the neck reset incorrectly, so It was not much of a guitar when it came in from what I could tell.
Bennyboy-UK Posted July 14, 2009 Posted July 14, 2009 I'm really impressed - thats aanabsolutely first rate piece of work. The result is fab, and very very authentic.The before pictures are pretty upsetting - revolting even! Tut! some people!How long did the project take from start to finish? Best wishes, and great work+kudos gentlemen.Ben
RoyB Posted July 14, 2009 Author Posted July 14, 2009 I'm really impressed - thats aanabsolutely first rate piece of work. The result is fab, and very very authentic.The before pictures are pretty upsetting - revolting even! Tut! some people!How long did the project take from start to finish? Best wishes, and great work+kudos gentlemen.BenThanks for that. Total time was a bit over six months.
Question
RoyB
Here is a Les Paul we just finished rebuilding and we thought it would make a cool video.
http://www.youtube.com/watch?v=gxKyD4WtiW8
17 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.