Hamer screws?

[mrjamiam]

I don't think I'm the only one who is irritated by having a guitar arrive either missing or with oddball replacement screws.  My main interest right now is in the trem and control cavity plate screws - can we still get the OEM item?  Or what is a reasonable facsimile?

 

[Jeff R]

Dimarzio or Allparts pickup ring mounting screws? That's what the OEM looks like to me.

[cynic]

Take one of the type you like to Ace Hardware.  Their "smalls" bins have never let me down.

[murkat]

these are very, very close to my gibson / Hamer stash of black, nickel, gold screws.

http://guitarelectronics.com/parts-hardware/screws-springs-washers/

[Disturber]

I was missing some screws on a used Hamer I bought. Emailed Hamer about it. A week or two later an envelope drops in the mailbox, full of small black screws. With a card from Kim Keller. Now I am in Stockholm, Sweden. So he sent it right over the pond to me. How is that for customer support, I did not even buy the guitar new! 

[tomteriffic]

Keller was Da Bomb.  When a lot of folks barrel jacks started giving up, Hamer sourced a replacement.  I called Kim about it, asked for one.  He asked how many guitars I had with that type of jack and he sent me one for each of them, without saying he was going to do it.

[luis]

All Parts screws are very soft so be aware. Guitar electronics ones are OK but longer. I would try Philadelphia Luthiers Supply, they are great and carry quality parts and cheaper.

[mc2]

 

Call Fender.....they would be the experts on Hamer screws.

[jamminpete]

The ones I had to replace turned out to be Philips flat head #2 wood screws.

Good luck trying to find them.  I got lucky and found a couple of packages at Menards in the wood screw section.