Jump to content
Hamer Fan Club Message Center

Zoner

Supporter
  • Posts

    765
  • Joined

  • Last visited

Everything posted by Zoner

  1. Liberated!!!! Good work and congrats. That thing is seriously hot looking, and I'll bet it doesn't suck as a player either. Z
  2. Should we take up a collection and "liberate" it from the Evil Empire? Z
  3. http://used.guitarcenter.com/usedgear/deta...istId=105009088 I have only seen these beauties with the red (Spruce?) top, but this looks HOT! I know it is GC, but it is very cool looking. Is the price in the park for one of these or the usual "GC" inflated number? Just curious. Z
  4. http://www.jibjab.com/view/248028 Z
  5. Some of you like these things, right? http://used.guitarcenter.com/usedgear/deta...istId=104762337
  6. These 2 keep me young and are making me grey at the same time! Fatherhood is the coolest thing I have ever experienced, by far, bar none. Happy Father's Day all you HFC dads! Z
  7. David, I hope it is something other than what you may suspect, and will offer my support and prayers for you. Be well. Z
  8. Hey Jaye, as a certified Strat Cat I feel I can give some pointers in the "how do I keep this $%^& thing in tune" dept. First off, unless you have some sort of space-age nut, you're gonna need some lube in there. Nut slots like graphite or something like Big Bends Nut Sauce (never tried it, but folks recommend it a lot for this purpose). Of course, make sure there is no binding going on in the first place. It looks like the plank you are weiding in the pic is at least the American Standard version so I'd be surprised if the nutwork was really shoddy, but you never know. I don't know if you have the trem set up to float at all, but having a good solid setup for your string of choice is obviously step #1. I have my bridges set up so I can pull up a fair bit, too, and that is part of the method I use to tune the dang things and get them to stay there. First off, tune each string bringing it up in pitch to your target. Then, take the whammy bar and depress it so the strings go nearly flat against the fingerboard. Let 'em back up and see where the pitch is. If you have gone sharp, try pulling the bar up and see if it gets you back in tune. If this action gets you back in tune, you're almost there. If not, try doing a whole-step bend and see if you drop back down to tuned. What you are trying to do is find the balance point where any sharpness due to diving or bending can be quickly "pulled" back in to tune. You end up tuning, dive-bombing, pulling up and starting all over again until it staays pretty well in tune no matter how abusive you get. Often times you have to tune a hair flat, do the drop, and it will jump up into proper tuning. I have had great luck keeping most of my Strats in tune this way, with the exception of my Jeff Beck, but that has a special (PITA) roller nut that I suspect is more trouble than it's worth. It might seem like a silly ritual, but with a little time and some proper setup and maintenance a traditional Strat trem can be made to stay pretty well in tune unless you are being radical. You should be able to grab the arm and do very wide vibrato stuff and not budge a bit out of tune. Or, there is always the Floyd Rose system Let me know if you need any help getting that thing dialed in. They are well worth the effort! Love the color choice, too. Z
  9. Caddie, I'll happily jet out there and "fetch" it back to the midwest for you . Last time I went the other way (MN to CA) on my Triumph and it was quick but exciting . I spent a month up and down the PCH and "over the hill" (mountain) daily and really learned a lot about riding that bike. Get out there and flog that Beemer, Punkavenger! Z
  10. Lots of cool Hamer model names, but my fave is by far Phantom. That is a perfect name for an edgy, dangerous rock dude's guitar. Most of the names are cool, but I have issues with some Hamer names being, um, "borrowed" from other prior examples. I have owned both Ibanez, and later Hamer "Studio" models. Same with Ibanez and Hamer Artists. The name "Standard" was not specifically brand specific at the time, but when they came out with production Hamers both "Sunburst" and "Standard" were associated with another guitar company's product. Same with the "Special". I have never owned a Kramer Vanguard or an ESP Mirage, but they came first too, didn't they? Bah, on second thought, what's in a name? I like the racetrack names and all the others, shared or not. The whole musical instrument gene pool is totally inbred and copied freely anyway, and the result is a great mish-mash of cool gear to play with. Z
  11. GREAT work and a perfect look after it is all done. Now we need to see the Kahlered original (pre-zebra), the Zebra-fied state and the finished product all in a row for the "before", "after", and "after - after" effect. That wood has been throgh some journey but it probably never looked better since the day it left Illinois back in the day. Love the corner chippage, too - bold move after all that beautification to go and rough it up. . Z
  12. Well, from my increasingly foggy memory I can give a direct comparison as I have owned the very, very original B.K. Butler unit (I ordered it out of the back of Guitar Player Waaaaay back When) until not too long ago and have 2 TK999's and a Tube Works Real Tube currently in the house. First off, the old standard B.K. unit had some GREAT sounds in it, especially hitting the front of an already grinding Marshall. The best quality it had was the ability to grind with clarity (if that makes any sense). That thing into the front of my Jubillee was a seriously cool sounding combo. In comparison, the Ibanez TK imparts a bit more "color" to the sound and has a greater capacity to get really, really filthy and dark. It sounds like a distortion box as opposed to a raging tube amp. The Original had a real live AC cord and may have hit the tube with more voltage, but I'm just guessing here. The TK is probably a bit more versatile, especially if you are after a heavy-duty metal tone, but I think the original had more musicalty to it (am I making words up as I go?). The 2 TK999's I have contain different boards, and one is screened with B.K. Butler stuff while the other says it is a Tubeworks product. They also sound quite different with the B.K. boarded one being "rawer" and the other being quite smooth and sweet. It could be the tubes themselves too I guess. The Tubeworks Real Tube has almost the same setup as the Ibanez and the original Tube Driver, and probably sounds closer to the original than the TK999. The TK999 has a HORRIBLE AC jack that needs to be swapped to make it usable unless you are permanently mounting it on a pedalboard. If you breathe on the cable it will pop out. I guess I should have asked if you are asking about vintage B.K Butler Tube Drivers or are considering a brand new one as I understand he's cranking them out again. If you are considering picking one of the TK999's up or want to check the out Tubeworks Real Tube (highly recommended but read the label as some were made in Taiwan too), I would be happy to send all 3 to you to "test drive" since I hardly use them anymore (and should sell them but.....y'know) and do a comparison using your rig, I'd just ask for a few bucks for shipping. I hope this was helpful. Z
  13. What would we label this little number? Just curious as I have not seen this version before but it looks pretty tough. Z http://used.guitarcenter.com/usedgear/deta...istId=104597187
  14. Is she touching herself or shielding her bits from your obviously overpowering manly influence? Z
  15. So very sorry to hear of your loss. Many positive vibes for all of you from one who has been there. Take care and be well, brother. Z
  16. My take, if anyone gives a rat's, is that he is a talented individual that has done what is the most important thing in music very well - bring joy to others through his work. Those that he appeals most to probable don't care one bit about his "chops", but enjoy what he is putting out and that is a great thing. If he is capable of making people FEEL just by performing, he is way ahead of the curve. Sure he make goofy faces and has written some "poppy" songs, but he is capable of inspiring true emotion(positive and negative) just by simply doing what he obviously loves. Lucky guy, JM. And someone who just happens to be living what is a dream for most of us. People get too hung up on "technical ability" or "tone" or "cred" and get all judgenmental, but forget what this music thing is all about - tapping into emotion. And on that count, he is a huge success. I own none of his albums and don't know if he is a "guitar god", but I don't agree that he deserves the hate that is thrown his way. He also doesn't seem to take himself too seriously which is kinda refreshing. Z
  17. Jaye, you are truly the very definition of RAWK - the world is a better place for your renewed pursuit of whatever the hell you get out of it. I especially love a pool table with plywood on top. Classic! I can't wait to start gigging again. Z
  18. BTMN, I have the Nighthawk from that series and have to ask - is the Charvel neck on yours a baseball bat or more shredder friendly? Mine is a full 1" end to end and the guitar is a war club but sounds great after I dumped the stock Super Distortos. Nice axe that is way under the radar I think as far as a good, solid playing American rarity, eh? Z
  19. I imagine you have to have some smarts to roll your own guitar and have it be not only functional but last for several decades, too. One of my all-time faves and responsible for one of those unforgettable concert experiences: Lights go down, crowd roars and then - a HUGE Brian May power chord that literally made my hair stand up! What a tone. Brialliance on many levels so it seems. Z
  20. Greg, I'm here in the Twin Cities as well and will offer my prayers and well wishes for your mother and your family. If you ever need a hand or want to talk to someone who has been down this road a couple times, let me know. Peace to you and yours (and to EVERYONE for that matter). Z
  21. What do they call those little triangle inlays? They look like the ones on the Peavey Odyssey that was copied for the Talladega body shape! (ducking) Z
  22. I posted on the old bulletin board and got what I was looking for quickly from some cat named Ted. I had an old checkerboard Special and need some wiring help, and got a quick and very helpful reply. This board is great, although I have spent too much time here over the years and have let differing opinions get to me on occasion . When I got real frustrated and was ready to sell ALL my stuff and become a porch-sitting acoustic strummer, a fellow HFC'er reached out and invited me to try a different playing situation. I am now enthusiastic again and feel like a family member here. Thanks brothers and sisters, and a big, big thanks to Robbie and Ted (and Stu, too). Z
  23. I'm in the process of buying the one in AZ, but they seem to have "lost" the OHSC it came in with and they are slooooooow to reply, plus the only person I have reached so far that has a clue is off today. I LOVE GC!! Z GC hates to "give" you a case. They used to charge extra for PRS cases when everyone else included it in the price. They did offer to make me a "killer" deal on some kind of SKB box - after they said it came with a OHSC. I'm not shelling out extra for a case after the deal is done, dammit - that's BS. Is Emerald Green as cool as it sounds in person? $800 shipped for a wrapper Studio in the park? I love my wraptail Artist Studio (it's my last Hamer standing) and wanted to buy one last pre-Fender Hamer that I'd always liked. I hope the green is cool! Z
  24. I'm in the process of buying the one in AZ, but they seem to have "lost" the OHSC it came in with and they are slooooooow to reply, plus the only person I have reached so far that has a clue is off today. I LOVE GC!! Z
  25. Wow, cool story. That says a lot right there about the "big picture" and how business really works these days too. Young Turk chooses engineering over Tommy Dorsey, makes some splashes in a couple industries (usually the sign of some kind of creative genius when you think across product applications with new tech/materials) and some $$ being a innovator much like Leo Fender and others. I appreciated the use of that "surplus" Sitka for the Ovation tops and using aerospace geeks to help with design. We do have some cool alternative acoustics as a result I would say. It does sound, however, like there was some pressure from Kaman investors who, like many concerned onlookers, see only the devil in musical instruments and such, so the offloading of Kaman's musical wing might have originated from within and Fender certainly seems to be a perfect "Corporate" fit, with the musical lines other than Hamer having value as well. Drums by Gretch would fit, Ovation and Tak are a slam-dunk (Fender can have a legit high-end acoustic selection),and they have all the doo-dads and accessory goods and most importantly - the venues through which to move all this stuff. I think the distribution angle might be as big as the product lines here, and if that is the angle Fender will use to push all this new stuff(including their own current), be ready to see the retail landscape change yet again. Pray for your local Mom and Pop. Not to speculate on anyone's future or current Biz but I wonder if I can get my 2008 Hamer at Willie's (a current Fender dealer who somehow manages to keep all the bottom-feeder stuff off the shelf), or if our own BCR Greg will have to take on the Fender (Jackson/Charvel/Gretch/Guild/) line in order to keep selling Hamers? FMIC is become a VERY large gorilla my friends, and now they are messing in our yard, too. It irks me (as an unstable anti-corporate lefty whack-job) to think that these kinds of "money" choices have the potential for MANY creative and hard-working people to be adversely affected, depending on the whims of "corporate" or whoever Jol and those at Hamer(Ovation/Jackson/Charvel.....) answer to. If they had issues under their current umbrella and needed to move or be forced to make compromises, I guess this is fantastic news. I hope they can still pusue THEIR creative vision for what the Hamer brand will be be in this new incarnation and chapter of the brand, avoiding unwanted interference or mandated changes that may influence quality, availability, service, or model choice. If Jol and Co. wanted to expand wildly (if that is any part of the plan - to increase production substantially) and needed more $$$ to do so, this is probably great news. If they got news from upstairs that they have been tossed to the Big Machine and "best of luck" and there is lots of uncertainty and hand-wringing going on, that really sucks. The truth is most likely somewhere in the middle and we can only sit back and watch our favorite small manufacturing entity get thrust into the fast lane and trust that those at the wheel know what they are doing. Of course we will be hearing "it's all good" at this point but certainly stay tuned Best of luck, indeed, Kaman.
×
×
  • Create New...