Jump to content
Hamer Fan Club Message Center

FS: 90's Fender Japan Hot Rod Reissue Strat Tree-Fiddy


Recommended Posts

Posted

90's Fender Hot Rod Reissue. Based on a '62 reissue. This is a well-loved MIJ Strat with all the right stuff for those who want to rock it up a little. Flatter radius, big frets, OFR, Bridge humbucker, contoured neck heel, blah.....

PAF Pro in the bridge stock, Fender singles mid and neck. Has a pull coil-tap on the middle tone pot and a TBX on the bottom one. Just a great playing Strat with tons of tonal variety. Body is H-S-H routed too, if you want to go all Dave Murray on the bit.

Some dings and scratches, a bit of fret wear, and the treble-side trem post has been professionally repaired with a dowel and a strap due to the post rounding and making it non-stable. Just professionally set up at Vig guitars (he did the repair too) here locally with "9's" but I can get it set up with a different gauge if you prefer.

Looking for $400 $350 shipped for this one, or will trade towards a maple-boarded Daytona or MIJ Strat. 612-703-3990 if you have questions.

DSCN2570_zps82jfo1fq.jpg

DSCN2571_zpss7w1ljar.jpg

DSCN2573_zpszib7xqm7.jpg

DSCN2572_zpsjunwpgrl.jpg

Posted

The hot rods are great guitars. I had one for a little while and while its quality was very good I couldn't get along with the sound. I think it was due to the poplar body, might of been the PU anyway, I sold it.

This could be just what the doctor ordered for one of you!

Posted

Really, really, really nice guitars. Love that 60s version. Someone here should pick this one up. GLWTS

I have a '50s version that I got from a Fender rep visiting a store in NC who said it was one of the first two or three made and shipped to Corona for approval by FMIC (he mentioned that some of the marketing guys were in transition to Scottsdale at that time, but he picked it up during a meeting re: product line rollout for that year). It had a Kahler Steeler and Kahler locking nut in place of the OFR and he claimed it was modded by Fender in Corona with an EMG 85-SA-SA set (I have no idea why they did this, as it forced me to remove the pickguard to change the damn battery). No push-pull, but it did come with the TBX control. I literally played the frets off of that guitar (at least 180 three+hour gigs) and it has some nice battle scars and aged patina on the maple neck/board. It needs a crown/polish and set up so badly that it has been relegated to its case for most of the last 20 years.

Posted

Really, really, really nice guitars. Love that 60s version. Someone here should pick this one up. GLWTS

I have a '50s version that I got from a Fender rep visiting a store in NC who said it was one of the first two or three made and shipped to Corona for approval by FMIC (he mentioned that some of the marketing guys were in transition to Scottsdale at that time, but he picked it up during a meeting re: product line rollout for that year). It had a Kahler Steeler and Kahler locking nut in place of the OFR and he claimed it was modded by Fender in Corona with an EMG 85-SA-SA set (I have no idea why they did this, as it forced me to remove the pickguard to change the damn battery). No push-pull, but it did come with the TBX control. I literally played the frets off of that guitar (at least 180 three+hour gigs) and it has some nice battle scars and aged patina on the maple neck/board. It needs a crown/polish and set up so badly that it has been relegated to its case for most of the last 20 years.

Trade ya.......

Posted

Hey Z - what's the neck profile like on hat one?

Posted

carfish, I would take that deal if I hadn't developed an attachment to it. But it is the one relic from my earliest experiences in playing for real money that I have left...and the scratches, dings, and chips, while modest by factory relic'ing standards, were borne of actual gigging.

Posted

Hey Z - what's the neck profile like on hat one?

Typical "medium C" I'd say. The flatter radius makes it feel different obviously, but it feels like most current Fender models that don't have a special carve.

Some of the '62 Reissue models had a bit beefier profiles, and maybe a slight "D" aspect. This one, not so much. Ted could tell you about it too as it was his for many years.

Posted

carfish, I would take that deal if I hadn't developed an attachment to it. But it is the one relic from my earliest experiences in playing for real money that I have left...and the scratches, dings, and chips, while modest by factory relic'ing standards, were borne of actual gigging.

Understood. I have one of those too - my '83 MIJ Squier Strat I bought new when they first hit the stores. You should get yours all spiffed up and play it again.

Posted

Mmmmm. OFR'ed Stratty goodness.

Were it not for owning a '76 that I did essentially same thing to, I'd be ALL over that, 22 frets and all. There's a classic beauty to that thing. GLWTS

Posted

HEY saw that one on craigslist this AM and haven't stopped thinking about it. Also was a casual friend of Loven back in the early 90's I'll PM you. Let's make a deal. I'm in Chaska.

Posted

Saw Loven last weekend doing his one man band thing at a dive bar near me. Even in front of a 1/2 dozen uninterested trailer park denizens, he still put on his "A" game. He was playing a white version of this that had been "Loven-ized", which to me looked like losing the tone controls and not much else?

I think he knows EVERYONE here in town!

Posted

Find me one in shell pink or sonic blue, and I'd be even more smitten!

Here you go!

It's not as if Z's offering up some vintage piece that'll be worth bazillions at some future date. Just a great looking player's guitar, customizable to your preference.

Posted

Played this one today great axe! Also got to meet Z. Super nice guy. How's the new Ibanez? :D

Posted

Played this one today great axe! Also got to meet Z. Super nice guy. How's the new Ibanez? :D

It was great to meet you as well! Another cool HFC cat to be sure.

The Ibanez had the Backstop on board, so it will basically be a "free" MIJ Ibanez. :lol:

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...