All Activity

SOLD!

Then start your own thread.

Cool Chap for sale (not by me). It's located six hours from where I live, so I can not help checking it out. But if anyone is interested I might be able to assist with communicating with the seller. Just send me a pm. About 1400 euros. https://www.blocket.se/recommerce/forsale/item/26660455?finnMail=agent&aur_so=aurora&aur_me=email&aur_ca=search-emailsender&stored-id=4348417&ci=3

GLWTS, this is a good price. If I didn't already have one, I'd be looking at it seriously. These are such cool guitars.

I agree with all of this except for the XR18, in my opinion, you NEED another router/wireless. When I had one and used the internal wireless, it's 802.11g, which is about 4 or 5 generations behind current wifi standards. I found it slow to respond. My 2 cents.

Those are classics. They are spec for 57's

I have one, a 2013. It is glorious. I'll pass it to my fam when i leave.

A beauty, I have also my 2013 R9 reissue that I want to sell.

It has the nut used on guitars with Kahlers in that era. If the pickups are stock, it could be a late 80's If i could be picked up cheap, great. you'll have several hundred at a min. to get the neck fixed correctly. what the serial # ?

Brian May honoring Steve in a new song. Also Hamer sighting for a 2nd somewhere in the mids of the vid. Billy Gibbons playing guitar too. Bon voyage to Steve.

Yes. That is very odd.

Yep, when you say old BOC I'm thinking Secret Treaties and earlier.

This thing has a lot going for it...very pretty top, og case and has a sustain block BUT but had a headstock repair, 5 years ago they say. Kind of looks like it was glued only, no dowels. For the price they want, I'm leaning in. It's priced like it has an ugly repair. Disclaimer is I've not seen in person, pics only. Assuming it's structurally sound I think I can make the break/repair area look better. What's concerning is the truss rod area. It doesn't look right. It looks like there's more material/distance between the nut and where the truss rod access carve and screw hole for cover should be. Also, you can see the top of the headstock had work. Must've broke clear through. What are you seeing here?

I have a Behringer XR18r and for the money, you can't beat them for small(ish) band needs. You need a tablet or laptop and a separate router is recommended, you get 18 channels, 6 aux sends, some effects and can save configs. if you go old school analog, I think a new/used Yamaha would be a real safe bet. They're nice, sound good and can be had new/used at a decent price w/ aux send(s), basic effects, compression on a few channels. I have a MG12X I bought used a number of years ago, or maybe the 16 for you? I dislike how they all count channels these days. The 12 is really 8 because they count stereo inputs as two channel. The MX12 has 8 channel faders, so IMO it's an 8 channel mixer. All manufacturers are doing that.

Since I only play at home now, I too have been down the modeler rabbit hole having owned most every one, and some more than once. I finally realized I only need a few amp sounds and a few effects so I’m sticking with 20 watt amps. At least for now.

RIP Peter Max

Another fantastic deal. Way below market...

This is a righteous deal. And the weight is the most appealing aspect of it (to me). Far below "market"...

The mixer we've been using has crapped out, so we are in the market for at least an 8 channel, possibly 12 channel, mixer that has outs for both mains and monitors. Not looking to spend a ton of money and used is okay. ATM running 4 mics and 2 inputs for keys What do you all recommend?

Robert Jon & The Wreck are a great Southern Rock band... from California. When they tour the East Coast they are one of my panned shows to see. Eric Gales lives in North Carolina, and there are opportunities to see him every year if one is willing to drive a bit. When he is within a couple of hours I can see him, and it will always be worth the time.