A couple of years ago I signed on to get some info on an early Hamer I accquired. Well i'm finally getting around to doing this and I wanted some input from the Hamer pro's.
Lemme know what you guys think. Any and all suggestions are welcome !
Being the number of pictures allowed are limited I'll post the link to the ReRanch Forum thread.
Question
SG Lou
Hello Gents
A couple of years ago I signed on to get some info on an early Hamer I accquired. Well i'm finally getting around to doing this and I wanted some input from the Hamer pro's.
Lemme know what you guys think. Any and all suggestions are welcome !
Being the number of pictures allowed are limited I'll post the link to the ReRanch Forum thread.
http://reranch.com/reranch/viewtopic.php?p=304349#304349
As of Today I have routed the FB edge for binding and I have routed the FB for the Trap inlays.
I will need some help on a certain issue. When i milled off the top, like an IDIOT i forgot to make a template
of the cavity and the position of the holes for the 3 pots and switch.
Would any of you have this ?
Thanks for your help !
..Lou
Link to comment
Share on other sites
56 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.